668724
151
Zoom out
Zoom in
Previous page
1/450
Next page
147
Style/Pad Record mode
Event Edit: Filter
Reference
9. Scroll though the various events by using the scrollbar.
10. Select an event to be edited by touching it in the display.
This is usually a note, that you can edit.
For more information on the event types and their val-
ues, see “Event Edit: Event Edit” on page 145.
11. Edit the event.
Select the “M” parameter. Use VALUE DIAL to change
the events position.
Select the Type parameter. You may use VALUE DIAL to
change the event type, as well as its Value 1 and Value 2.
If a Note event is selected, select the Length parameter,
and use VALUE DIAL to change the events length.
12. You may use the Go Meas. command to go to a different
measure (see “Go Meas.” on page 146)
13. As described in step 4, you may press START/STOP to lis-
ten how the pattern sounds after your changes. Press
START/STOP again to stop the pattern running.
14. Touch the Insert button in the display to insert an event at
the Position shown in the display (a Note event with default
values will be inserted). Touch the Delete button in the dis-
play to delete the selected event.
15. When editing is complete, you may select a different track
to edit (go to step 7).
16. When finished editing the selected Chord Variation, press
EXIT to go back to the main page of the Style Record
mode, then go to step 2 to select and edit a different Chord
Var iatio n.
17. When finished editing the whole Style, select the “Write
Style/Pad command from the page menu to open the
Write Style/Pad dialog box (see “Write Style/Pad dialog
box” on page 162), or select the “Exit from Recordcom-
mand to cancel all changes.
• Touch the (Text Edit) button to enter the Text Edit
dialog box. Enter a name and confirm by selecting OK.
• Select a target memory location where to save the Style/
Pad. The name of the Style/Pad already existing at the
selected location is shown after the Bank-Location number.
War ning : If you select an existing Style/Pad and confirm
writing, the older Style/Pad is deleted and replaced by the
new one. Save the Styles/Pads you don’t want to lose to a
storage device, before overwriting them.
18. Touch OK to save the Style/Pad to the internal memory, or
Cancel to delete any changes made in Style/Pad Record
mode. When the “Are you sure?” message appears, touch
OK to confirm, or Cancel to go back to the “Write Style” or
“Write Pad” dialog box.
Event Edit: Filter
This page is where you can select the event types to be shown in
the Event Edit page.
Turn On the filter for all event types you do not wish to see in
the Event Edit page.
Note: Some of the events are “ghosted”, and non editable, since the
corresponding events are not editable in a Style/Pad.
Note/RX Noise
Notes and RX Noises.
Control Control Change events. Only the following Con-
trol Change numbers are allowed with Styles/
Pads.
Tempo/Meter Tempo and Meter (time signature) changes (Mas-
ter Track only).
Pitch Bend Pitch Bend events.
Control function CC# (Control Change Number)
Modulation 1 1
Modulation 2 2
Pan 10
Expression
(a)
(a). Expression events cannot be inserted at the starting Position (001.01.000). An
Expression value is already among the default “header” parameters of the Style Ele-
ment or Pad Track.
11
CC#12 12
CC#13 13
Ribbon 16
Damper 64
Filter Resonance 71
Low Pass Filter Cutoff 74
CC#80 80
CC#81 81
CC#82 82
151


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Korg PA900 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Korg PA900 in the language / languages: English as an attachment in your email.

The manual is 44,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info