Manual Korg PA600QT (page 19 of 408) (English)

668718

Zoom out

Zoom in

1/408

Overview

Front Panel

Introduction

edit sections by touching the corresponding button in the dis-

play.

Otherwise, press EXIT to return to the main page of the current

operating mode, or the current page of the underlying operating

mode.

Tempo Section

The TEMPO and METRO buttons can be used to control the

Temp o.

TEMPO +/– buttons

TEMPO– decreases the Tempo value of the Style or Standard

MIDI File; TEMPO+ increases it. With MP3 files, the speed of

the file is respectively decreased or increased.

Press both buttons together to reset the Tempo to the value

memorized in the Style or Standard MIDI File. With MP3 files,

the original speed of the file is recalled (value reset to “0”).

TEMPO LOCK

This button turns the Tempo Lock function on or off.

On When you select a different Style or Performance,

or select a different Song, the Tempo will not

change. You can still manually change it, by using

the TEMPO +/– buttons, or select the Tempo

value and change it by using the VALUE dial.

Off When you select a different Style or Performance,

or select a different Song, the memorized Tempo

will be automatically selected.

Note: This button does not work with MP3 files.

You can jump to the Global > Lock page by keeping

SHIFT pressed and pressing this button.

METRO

Use this button to turn the metronome click on or off.

You can jump to the Global > General Controls > Basic

page by keeping SHIFT pressed, and pressing this button.

Split

Splitting the keyboard allows you to separate the

chords area from the melody.

SPLIT

In Style Play, Song Play and Sequencer-Backing

Sequence mode, use this button to choose how the four Key-

board tracks are positioned on the keyboard, and how chords are

recognized by the arranger.

Note: The ACCOMP LED must be turned on for the accompani-

ment to play.

On The Lower track plays below the split point, while

the Upper 1, Upper 2 and Upper 3 tracks play

above it. This is called the Split keyboard mode.

By default, turning on the Split mode automati-

cally selects the Lower chord scanning mode. In

this mode, chords are detected below the split

point.

Off The Upper 1, Upper 2 and/or Upper 3 tracks play

over the whole keyboard range. The Lower track

does not play. This is also called the Full key-

board mode.

Turning off the Split mode automatically selects

the Full chord scanning mode. In this mode,

chords are detected over the full keyboard range.

You must always play three or more notes to let

the arranger recognize a chord.

By keeping this button pressed for about one second, the

Split Point window appears. When there, play the new split point

on the keyboard.

Ensemble

The Ensemble function automatically harmonizes

the melody played with the right hand.

ENSEMBLE

This button turns the Ensemble function on or off.

When on, the right-hand melody is harmonized with the left-

hand chords.

Note: The Ensemble function only works when the keyboard is in

SPLIT mode.

You can jump to the Style Play > Keyboard/Ensemble

page by keeping SHIFT pressed and pressing the ENSEMBLE

button.

Performance Select Section

Use these buttons to select a Performance. Performances memo-

rize all Sounds assigned to the keyboard, most control panel set-

tings, and an associated Style.

MY SETTING

This is a special direct-access Performance, that is automatically

selected when the instrument is turned on. When pressing this

button, the Performance is immediately selected.

Keep this button pressed for about one second to save the

current settings into the My Setting Performance.

PERFORMANCE buttons

Use these buttons to open the Performance Select window, and

select a Performance.

Each Performance bank contains five pages, each with up to

eight Performances. Repeatedly press a PERFORMANCE button

to cycle between the available pages.

All Performances can be freely customized, by accessing the edit

pages of the Style Play and Song Play modes by pressing the

MENU button.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Korg PA600QT in the language / languages: English as an attachment in your email.

The manual is 39,35 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Korg PA600QT Manual

Product: