707337
13
Zoom out
Zoom in
Previous page
1/103
Next page
Quick start
13
Playing a vocoder program
A vocoder modifies the signal from an oscillator or other source (the “car-
rier”) by applying the spectral characteristics of an external input source
such as a human voice (the “modulator”).
The most common way to use a vocoder is to produce a “talking instru-
ment” effect by taking the input of your voice from the mic while you hold
down a chord on the keyboard. However you can also obtain interesting
results by using audio input sources other than a human voice, such as
rhythm sounds or anything you like. Here’s how to connect a mic and try
out the vocoder.
1. Turn the rear panel AUDIO IN [LEVEL] knob all the way to
“MIN.”
2. Connect
the mic to the front panel AUDIO IN [MIC] jack
(J p. 9 “Connecting the included mic”).
3. Set t
he rear panel [XLR/LINE] switch to “XLR.”
4. Sele
ct a vocoder program.
2
1
4
3
With the factory settings, category 8 or program A18, A28 etc. contains
vocoder programs. When you select a vocoder program, the [VOCODER]
button LED will light.
5. Adjust the mic input level.
While vocalizing into the mic, turn the AUDIO IN [LEVEL] knob toward the
right as far as possible without allowing the “CLIP” indication to appear in
the level meter shown to the right of the display.
NOTE
If you want to audition the audio input directly, hold down the [EXIT/
SHIFT] button and press the [VOCODER] button (
J
p. 13).
6. While vocalizing into the mic, play the keyboard.
To hear different vocoder effects, try vocalizing in different ways and chang-
ing the chord you play.
NOTE
If you’re unable to hear the effect, adjust the VC CARRI page
“TMBR1.LVL” parameter or the VC AMP page “VC LEVEL” parameter
(
J
p. 55,
J
p. 56).
NOTE
Some vocoder programs will produce sound when you simply play the
keyboard; there’s no need to vocalize into the mic.
5
6
Listening to the audio input (AUDIO IN THRU)
If you hold down the [EXIT/SHIFT] button and press the [VOCODER] but-
ton, the audio input signal from the AUDIO IN [MIC] jack or the AUDIO IN
[LINE] jack will be sent from the OUTPUT [L/MONO], [R] jacks without
modification.
To return to the normal state, hold down the [EXIT/SHIFT] button and press
the [VOCODER] button once again.
Quick start
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Korg microKORG XL at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Korg microKORG XL in the language / languages: English as an attachment in your email.

The manual is 8,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info