707337
10
Zoom out
Zoom in
Previous page
1/103
Next page
microKORG XL
10
2. Turning the power on
Before you turn on the power
Make sure that the power switch is off (the outward position) before you
prepare the power supply.
Connecting the AC adapter
1. Make sure that the microKORG XL is powered-off.
2. Conn
ect the included AC adapter to the DC9V jack located
on the rear panel.
Use only the included AC adapter. Using any other AC adapter may
cause malfunctions.
3. Plug the AC adapter into an AC outlet.
Use an AC outlet of the correct voltage.
Using batteries
The microKORG XL can also operate on batteries.
NOTE
Batteries are not included. You’ll need to purchase them separately.
Installing/replacing the batteries
1. Make sure that the microKORG XL is powered-off.
2. O
pen the battery cover located on the bottom of the
microKORG XL.
3. Inser
t six AA alkaline batteries (sold separately).
Make sure that the batteries are oriented correctly.
4. Close the battery cover.
About the battery empty indicator
When the battery capacity runs down, the “ ” indicator will appear on
the display. If you continue to use the unit in this state, the indicator will
begin blinking, and the Write Protect setting will automatically be enabled,
making it impossible to save programs or global settings. We recommend
that you replace the batteries as soon as possible, or use the AC adapter.
If you are in the middle of editing when this state occurs, and need to save
the changes you’ve made, you’ll need to connect the AC adapter so that
you can execute the Write operation.
Depleted batteries should be immediately removed from the
microKORG XL. Leaving de
pleted batteries installed may cause
malfunctions (such as leakage of the battery electrolyte). You should
also remove the batteries if you won
t be using the microKORG XL
for an extended period of time.
Turning the power on
Before you power-on the microKORG XL, you must power-off any
external output device such as your powered monitor speakers.
1. Turn the microKORG XL’s [VOLUME] knob all the way to
the left.
2. Pr
ess the power switch to turn on the power.
The display will indicate the program number and program name.
3. Lower the volume of your powered monitors or other exter-
nal output equipment.
4. T
urn the microKORG XL’s [VOLUME] knob to an appropri-
ate position.
5. Ad
just the volume of your external output equipment.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Korg microKORG XL at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Korg microKORG XL in the language / languages: English as an attachment in your email.

The manual is 8,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info