707422
59
Zoom out
Zoom in
Previous page
1/73
Next page
55
CH [01] PAN 04(04) 32(20)
CH [02] PAN 04(04) 34(22)
CH [03] PAN 04(04) 36(24)
CH [04] PAN 04(04) 38(26)
CH [05] PAN 04(04) 40(28)
CH [06] PAN 04(04) 42(2A)
CH [07] PAN 04(04) 44(2C)
CH [08] PAN 04(04) 46(2E)
CH PAN:
0/1: L63, 2: L62...63: L01
64: CNT, 65: R01...127: R63
CH PAN:
0/1: L63, 2: L62...63: L01
64: CNT, 65: R01...127: R63
Vocoder Parameter
MSB (Hex) LSB (Hex)
Value (transmitted) Value (received)
If you are transmitting these parameters between two microKORG S units, set both
units to the same program settings.
System exclusive messages
microKORG S format
F0: exclusive status
42: Korg ID
3n: [n=0—F] MIDI channel
00 01 40: microKORG S model ID
ff: function ID (type of message)
F7: end of exclusive
Universal system exclusive
System exclusive messages include a special category of messages whose purpose is
officially defined. These are called universal system exclusive messages.
Of these universal system exclusive messages, the microKORG S supports Master
Volume and Master Fine Tuning.
Master volume [F0, 7F, nn, 04, 01, vv, mm, F7]
(vv: lower byte of value, mm: upper byte of value, [mm, vv=7F, 7F] is Max, [mm, vv=00, 00] is
0)
When a Master Volume message is received, the microKORG S will adjust its overall
volume.
If GLOBAL "AUDIO IN THRU" is ON, the input signal of AUDIO IN 1/2 will not be
affected by Master Volume.
Master fine tuning [F0, 7F, nn, 04, 03, vv, mm, F7]
(A value of 8192 [mm, vv=40, 00] is center (0 cent, A4=440.0Hz), 4096 [mm, vv=20, 00] is -
50 cents, and 12288 [mm, vv=60, 00] is +50 cents.)
When master fine tuning is received, the value specified for the microKORG S's
GLOBAL "MASTER TUNE" will be ignored, and the overall pitch will be specified by
the data that was received.
Messages transmitted and received by the microKORG S
Transmitting sound settings etc. (Data Dump)
Program data and global data can be transmitted as a MIDI exclusive data. The action
of transmitting MIDI exclusive data to an external MIDI device is called a data dump.
By performing a data dump, you can store various types of data on an external MIDI
device, or rewrite the sounds or settings of a second microKORG S.
Data dumps can be performed on the microKORG S as follows.
Use the SHIFT function "MIDI DATA DUMP" to select the data that you want to
transmit (1PROG, PROG, GLOBAL, ALL), and dump the data.
1PROG will dump only the data of the selected program. When the microKORG S
receives such a data dump, the settings of the currently selected program will be
rewritten by the data that was received.
In this case, the data will not be saved unless you perform the Write operation.
PROG will dump the data for all programs saved in memory.
GLOBAL will dump the global data (GLOBAL, MIDI, and some of the SHIFT function
settings p.58).
ALL will dump all programs as well as global data.
If PROG, GLOBAL, or ALL dumps are received by the microKORG S, the data will be
written directly into internal memory; you do not need to perform the Write
operation.
When a dump request is received from an external device, the microKORG S will
transmit the data dump that was requested.
If you want the microKORG S to receive a data dump, turn the SHIFT function
"WRITE PROTECT" OFF (
), and set the MIDI FILTER setting "SYSTEM EXCLU-
SIVE" to Enable (
). If this is set to Disable ( ), data dumps can not be received.
If you wish to obtain the "MIDI Implementation" which includes details of the MIDI
exclusive format, please contact a Korg dealer.
microKORG S can only receive a data dump of parameters that it shares with
microKORG. For details on the shared parameters, refer to "MIDI Implementation."
Realtime Messages
Starting/stopping the arpeggiator
When the microKORG S's arpeggiator is synchronized to a connected external MIDI
device, system realtime messages Start and Stop will control the arpeggiator.
Start [FA]
When a Start [FA] message is received, the arpeggiator will start from the pitch of the
first played note.
59


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Korg microKORG S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Korg microKORG S in the language / languages: English as an attachment in your email.

The manual is 6,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Korg microKORG S

Korg microKORG S User Manual - German - 73 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info