707422
56
Zoom out
Zoom in
Previous page
1/73
Next page
52
Messages transmitted and received by the microKORG S
If you want program changes to be transmitted and received, set the SHIFT function
"MIDI FILTER" to PROGRAM CHANGE Enable (
). If this is set to Disable ( ),
program change messages will not be transmitted or received.
Pitch bend
Pitch bend change [En, bb, mm]
(n: channel, bb: lower digits of value, mm: upper digits of value)
When pitch bend change messages are received, a pitch bend will occur according to
the PITCH "BEND RANGE" value. Pitch bend can also be used in a Virtual Patch for a
synth program, or as an FC MOD modulation source for a vocoder program. In this
case, the message will act as a modulation source where mm=64, bb=00 will be 0
(center value) for the range of -127 - +127. (This message is received on the timbre
channel.)
When you move the PITCH wheel on the microKORG S, pitch bend change messages
are transmitted on the MIDI channel("MIDI CH").
If you want pitch bend changes to be transmitted and received, set the SHIFT function
"MIDI FILTER" to PITCH BEND Enable (
). If this is set to Disable ( ), pitch
bend change messages will not be transmitted or received.
Control changes
Control changes [Bn, cc, vv]
(n: channel, cc: control change no., vv: value)
When you use knobs 15 to edit certain parameters, or when you operate certain keys
or the MOD wheel, the assigned control change will be transmitted. Conversely, when
control change numbers corresponding to the knob 15 settings are received, the
corresponding controller or parameter will be controlled.
MIDI channels
MIDI uses sixteen channels (1-16). MIDI messages can be transmitted and received
when the channel of the receiving device matches the channel of the transmitting
device.
MIDI messages such as note-on/off and pitch bend are transmitted and received on
the MIDI channel specified by the MIDI "MIDI CH" setting.
Note-on/off
Note-on [9n, kk, vv], Note-off [8n, kk, vv]
(n: channel, kk: note number, vv: velocity)
When you play the keyboard of the microKORG S, note-on/off messages are
transmitted.The note-off velocity is transmitted at a fixed 64, but is not received.
If the MIDI "POSITION" is Post KBD (
), note-on/off messages will be transmitted
by the arpeggiator when it is running.
Program change
Program change [Cn, pp]
(n: channel, pp: program number)
Bank Select (CC#00) [Bn, 00, mm]
Bank Select (CC#32) [Bn, 20, bb]
(n: channel, mm: bank number upper byte, bb: bank number lower byte)
When you switch the program on the microKORG S, bank select and program change
messages corresponding to the selected program number 1 - 256 (A.11 - d.88) will be
transmitted. Similarly, when the microKORG S receives bank select and program
change messages, the program will change. (Voice Name List)
Middle C on a
piano is C4 (MIDI
note number 60)
Octave Shift settings and note numbers
C7
(96)
C8
(108)
C9
(120)
G9
(127)
C#8
(116)
C9
(120)
C5
(72)
C6
(84)
C3
(48)
C4
(60)
C1
(24)
C2
(36)
C-1
(0)
C0
(12)
Octave Shift not used
+1 octave
+2 octaves
+3 octaves
-3 octaves
-2 octaves
-1 octave
56


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Korg microKORG S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Korg microKORG S in the language / languages: English as an attachment in your email.

The manual is 6,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Korg microKORG S

Korg microKORG S User Manual - German - 73 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info