500238
205
Zoom out
Zoom in
Previous page
1/244
Next page
203
Effects
ER/Delay
c: Envelope Select, c: Src, d: Threshold
These parameters select the source to control the start and
end of recording.
When “Envelope Select” is set to D-mod, the input signal will
be recorde
d only when the value of the modulation source
selected by the Src parameter is 64 or higher.
When “Envelope Select” is set to Input, the input signal will
be recorded
only when its level exceeds the Threshold level.
When recording is completed, reverse playback starts imme-
diately.
043: L/C/R Delay
This multitap delay outputs three Tap signals to the
left, right,andcenter respectively. You can also adjust
theleftandrightspreadofthedelaysound.
e: High Damp [%], e: Low Damp [%]
These parameters set the damping amount of high range and
low range. The tone of the delayed sound becomes darker
and lighter as it feeds back.
g: Spread
This parameter sets the pan width of the effect sound. The
ste
reo image is wi
dest with a value of 50, and the effect
sound of both channels is output from the center with a value
of 0.
044: Cross Delay
(Stereo/Cross Delay)
Thisisastereodelay,andcanbyusedasacrossfeed
backdela
yeffectinwhichthedelaysounds
crossover
between the left and right by changing the feedback
routing.
a
L Delay Time [msec]
Sets the delay time of TapL
0...1360msec
Level
Sets the output level of TapL
0...50
b
C Delay Time [msec]
Sets the delay time of TapC
0...1360msec
Level
Sets the output level of TapC
0...50
c
R Delay Time [msec]
Sets the delay time of TapR
0...1360msec
Level
Sets the output level of TapR
0...50
d
Feedback (C Delay)
Sets the feedback amountof TapC
–100...+100
Src Off...Tempo
Selects the modulation source of the TapC feedback amount
Amt –100...+100
Sets the modulation amount of the TapC feedback amount
e
High Damp [%]
Sets the damping amount in the high range
0...100%
Low Damp [%]
Sets the damping amount in the low range
0...100%
f
Input Level Dmod [%] –100...+100
Sets the modulation amount of the input level Fx:037,
Src
Selects the modulation source for the input level
Off...Tempo
Fx:037
g
Spread 0...50
Sets the width of the stereo image of the effect sound
h
Wet/Dry Dry, 1:99...99:1, Wet
Ta b le , “Sets the balance between the effect and dry sounds,” on page 175
Src Off...Tempo
Ta b le , “Selects the modulation source of the effect balance,” on page 175
Amt
Ta b le , “Sets the modulation amount of the effect bal-
ance,” on page 175
–100...+100
C Delay
R Delay
Left
Right
Feedback
Spread
Wet / Dry
Wet / Dry
Wet: Mono In - Stereo Out / Dry: Stereo In -Stereo Out
Input Level D-mod
High Damp
Low Damp
L Delay
Input Level D-mod
+
Level
Level
Level
a
Stereo/Cross Stereo, Cross
Switches between stereo delay and cross-feedback delay
b
L Delay Time [msec]
Sets the delay time for the left channel
0.0...680.0msec
c
R Delay Time [msec]
Sets the delay time for the right channel
0.0...680.0msec
d
L Feedback
Sets the feedback amount for the left channel
–100...+100
Src Off...Tempo
Selects the modulation source of feedback amount
Amt L –100...+100
Sets the modulation amount of the left channel feedback
e
R Feedback
Sets the feedback amount for the right channel
–100...+100
Amt R –100...+100
Sets the modulation amount of the right channel feedback
f
High Damp [%]
Sets the damping amount in the high range
0...100%
Fx:043
g
Low Damp [%]
Sets the damping amount in the low range
0...100%
Fx:043
h
Input Level Dmod [%] –100...+100
Sets the modulation amount of the input level Fx:037,
Src
Selects the modulation source for the input level
Off...Tempo
Fx:037
i
Spread –50...+50
Sets the width of the stereo image of the effect sound Fx:043
j
Wet/Dry Dry, 1:99...99:1, Wet
Ta b le , “Sets the balance between the effect and dry sounds,” on page 175
Src Off...Tempo
Ta b le , “Selects the modulation source of the effect balance,” on page 175
Amt
Ta b le , “Sets the modulation amount of the effect bal-
ance,” on page 175
–100...+100
Delay
Delay
Stereo/Cross
Left
Right
Feedback
Wet / Dry
Wet / Dry
Stereo In - Stereo Out
Input Level D-mod
Input Level D-mod
High Damp Low Damp
High Damp
Low Damp
Spread
Stereo/Cross
205


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Korg microARRANGER at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Korg microARRANGER in the language / languages: English as an attachment in your email.

The manual is 24,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Korg microARRANGER

Korg microARRANGER User Manual - German - 246 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info