Manual Korg Kross 2 (page 122 of 152) (English)

707348

122

Zoom out

Zoom in

1/152

Overall settings for the KROSS, and saving/loading data

116

Changing how velocity will affect the volume

and tone

Velocity curves let you adjust the way the KROSS responds

to your playing dynamics on the keyboard. The default

setting should work for most players, but there are many

other choices to let you customize the response to match

your own style.

• The GLOBAL> BASIC page Velocity Curve setting

specifies how velocity will affect the volume and tone.

Velocity Curve 4 is the default, and should work for most

players.

Curve 9 is designed specifically for playing piano sounds

from the weighted NH keyboards in the 88-note models.

(see “Velocity Curve” on page 156 of the Parameter

Guide)

• Specify the position where the velocity curve will be

applied. For more about “Convert Position,” please see

“Transposing the keyboard,” above.

Velocity curves

SYSTM (SYSTEM) page

In the GLOBAL>SYSTM (SYSTEM) page you can access

settings for the KROSS's effects and arpeggiator, and protect

the memory.

Bypassing the effects

You can bypass the KROSS’s insert effects, and master

effects. These settings will bypass the effects in all modes. If

you’re using effects such as reverb or chorus provided by an

external effect processor, mixer, or DAW, you can bypass the

KROSS’s own effects so that they will not be used.

• The GLOBAL> SYSTM (SYSTEM) page Effect SW

setting bypasses the effects. If the check box is cleared,

the effects will be bypassed.

Clearing the IFX box: Bypasses the insert effects

Clearing the MFX box: Bypasses the master effects

MFX can also be controlled using the front panel

REALTIME CONTROLS. Press the SELECT button to

select EFFECT, and use the SWITCH (MASTER FX) button

to turn it on/off. This is a convenient way to temporarily turn

off effects such as reverb while you perform.

Note: These parameters will always be turned on when the

KROSS starts up.

Arpeggiator recall settings (Linking the

arpeggiator with programs or combinations)

You can specify whether the arpeggiator settings written into

each program or combination will also be selected when you

select that program or combination, or whether the

arpeggiator will stay in its current state without changing

settings.

With the factory settings, the former will occur. You can

choose the latter behavior if you want to play phrases and

patterns with certain arpeggiator settings while you switch

only the sound between different programs or combinations.

• If the GLOBAL> SYSTM (SYSTEM) page LOAD ARP

WHEN CHANGING check boxes are selected for

Program and Combination, the arpeggiator settings that

are written will be recalled when you switch programs

and combinations respectively.

Disabling the arpeggiator, Step sequencer,

and drum track

• If the GLOBAL> SYSTM (SYSTEM) page ARP/SS/DT

check box is selected, the arpeggiators, the step

sequencer, and the Drum Track will be turned off.

Even if the ARP, RUN or DRUM TRACK buttons are

on, the arpeggiator, Step Sequencer, and Drum Track will

not function.

Protecting the memory

The KROSS provides a memory protect setting that

prohibits internal memory from being overwritten; this

prevents the program, combination, song, drum kit, and user

arpeggio pattern data from being modified unintentionally.

• To protect the contents of memory, you can select the

various Memory Protect check boxes in the GLOBAL>

SYSTM (SYSTEM) page to prohibit data from being

written or loaded, or songs from being recorded.

PREF 1 (Preferences 1) page

In the GLOBAL>PREF 1 (Preferences 1) page you can

access settings for the KROSS's power.

Auto power-off

• The GLOBAL>PREF 1 (Preferences 1) page Auto

Power-Off setting specifies the length of time after

which the power will automatically turn off when there

has been no user input on the KROSS for a specified

amount of time. (see page 18)

Battery type setting

In order for the remaining battery capacity to be correctly

indicated, the type of battery in use should be specified.

MAX

127

Soft

127

Strong

Velocity (MIDI In to sound engines)

Velocity (Keyboard to MIDI Out)

Convert Position = PostMIDIConvert Position = PreMIDI

Velocity

eect

Stop the arpeggiator, Step sequencer, and drum track

Eect bypass settings Memory protect settings

Auto power-oDisplay contrastBattery type

Auto Save

KORG Logo Light - Brightness

During last night's gig, my Kross 2 started changing "Favorites" - one after the other - switching through the banks and sounds, while I was playing. What could cause that. It didn't do it all the time, just every now and then at random. Submitted on 4-9-2022 at 00:59
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Korg Kross 2 in the language / languages: English as an attachment in your email.

The manual is 4,35 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Korg Kross 2

Korg Kross 2 User Manual - German - 152 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Korg Kross 2 Manual

Product: