Manual Korg Kross 2 (page 115 of 152) (English)

707348

115

Zoom out

Zoom in

1/152

109

Pad audio play

Performing with the pad audio

play function

Pad audio play is a function that lets you use the front panel

buttons and 16 pads to switch instantly between audio songs

recorded by the KROSS's audio recorder or existing audio

files.

Note: One song (one file) can be assigned to each of the 16

pads. A maximum of one audio song can play back

simultaneously.

Note: In order to use this function, there must be an SD card

formatted by the KROSS which contains audio songs

recorded by the KROSS or audio files that meet the

requirements listed in “Data that can be played back,”

below. If the SD card contains no data, this function cannot

be used.

Data that can be played back

• File format: WAVE format uncompressed linear PCM

• Bit depth: 16-bit

• Sampling frequency: 44.1 kHz or 48 kHz, stereo files

Specifying an audio song and

assigning the song to a pad

Note: The settings here are also reflected in the AUDIO

RECORDER SETUP window.

Note: When audio song settings are changed, data is loaded

from the SD card. Never remove the SD card while this

operation is being performed.

1. While holding down the EXIT button ( ),

press the AUDIO PLAY ACTIVE button ( )

to open the AUDIO PLAY SETUP window.

2. Select the audio play bank. Use the BANK SELECT

button and the indication of the BANK LEDs to

switch banks.

3. Press the pad to which you want to assign an audio

song or whose settings you want to change, or use the

cursor keys to select it.

4. Press the MENU (EDIT) button to open the AUDIO

SONG SETUP window.

5. Select the audio song that you want to assign.

Note: Following the audio songs, the audio song list also

shows a list of the WAV files that have been placed in the

specified location of the SD card. When you select one of

these, the Import WAV dialog box appears.

When you execute Import WAV, the file is imported as a

new audio song. (“Importing or exporting WAVE files”

on page 105)

6. Select the take of the selected audio song recorded by

the KROSS. Use the PAGE- (UNDO) button to open

the dialog box, and use the cursor keys to select the

take.

7. Adjust settings for loop playback. If you turn on

LOOP by adding a check mark,the song loops when it

is played back. Specify the loop region by setting the

loop start location (point A) and end location (point

B).

Note: Point A and point B will be at least three seconds

apart.

8. You can use the MENU (Start) button and PAGE+

(Stop/Reset) button to play back the audio song and

check the above settings.

Note: If you move the cursor to A or B, and press the

ENTER button during playback, the current time is

specified as the playback point.

9. When you've finished making settings, press the EXIT

button to close the AUDIO SONG SETUP window.

Using the pads to play back audio

songs

1. Make sure that the AUDIO PLAY ACTIVE button is

lit. To turn on the pad audio play function, press

AUDIO PLAY ACTIVE button.

2. Pads to which an audio song is assigned are lit. When

you press a lit pad, the assigned audio song plays.

During playback, the pad is lit more brightly.

3. When you once again press the currently-playing pad,

playback is paused and the pad blinks. Pressing the

pad once again in this state starts playback from the

paused location.

Tip: You can also stop the currently playing or paused audio

song by pressing the AUDIO PLAY ACTIVE button.

4. When there is a pad whose audio song is playing, you

can press a different lit pad to stop the currently-

During last night's gig, my Kross 2 started changing "Favorites" - one after the other - switching through the banks and sounds, while I was playing. What could cause that. It didn't do it all the time, just every now and then at random. Submitted on 4-9-2022 at 00:59
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Korg Kross 2 in the language / languages: English as an attachment in your email.

The manual is 4,35 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Korg Kross 2

Korg Kross 2 User Manual - German - 152 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Korg Kross 2 Manual

Product: