Manual Korg Kross 2 (page 92 of 152) (English)

707348

Zoom out

Zoom in

1/152

Drum Track function

Drum Track function settings in

Sequencer mode

The structure of parameters related to the drum track

function is the same in Sequencer mode as in Combination

mode. Assign the Drum Track program to the desired track

1–16.

However, while a combination triggers the Drum Track

pattern on the global MIDI channel, a song triggers the

Drum Track pattern on the MIDI channel specified by the

Input (S-DRUM TRACK> CHANNEL). Normally you’ll

set this to Tch. With the Tch setting, the MIDI channel of the

track selected by Track Select will automatically be used as

the trigger channel.

For details, please see “Selecting a Drum Track pattern and

Drum Track program” on page 84.

In Sequencer mode you can use the Drum Track function

while realtime-recording a song track or pattern.

The note-on/off data transmitted by the Drum Track pattern

can be recorded as events in a track or pattern.

You can’t use note data from the internal sequencer as a

trigger to start patterns for the Drum Track function.

When you’ve used the Drum Track function with a program

or combination to come up with an idea for a song, you can

then use the Auto Song Setup function to immediately start

realtime-recording. (see page 60)

MIDI transmission and reception for the

drum track

In Sequencer mode, the Drum Track function transmits and

receives on the following MIDI channels.

Receive: The drum track will receive on the MIDI channel

specified by the Input (S-DRUM TRACK> CHANNEL)

setting of each song. Normally you’ll set this to Tch and use

the KROSS’s keyboard to control the triggering.

Transmit: The drum track will transmit on the MIDI

channel specified by the Output (S-DRUM TRACK>

CHANNEL) setting of each song. Set this to match the MIDI

channel of the MIDI track where you’ve assigned the drum

program.

If the track’s Status (SEQ> PROG) is BTH, EXT, or EX2,

note data etc. of the Drum Track pattern will be transmitted.

Synchronizing the Drum Track

function

The Trigger “Sync” parameter

The trigger timing of a drum track will depend on the setting

of its Trigger Sync parameter. (Please see page 53, page 86

of the Parameter Guide)

On (checked): The trigger timing will be quantized to the

nearest beat relative to the base tempo.

Off (unchecked): If Trigger Mode is set to Start

Immediately, triggering will occur at the moment you press

the DRUM TRACK button. If this is set to Wait KBD

Trigger, triggering will occur at the moment you play the

keyboard.

Synchronization with the arpeggiator, step

sequencer, and Sequencer mode songs

Turn the Sync setting On if you want the Drum Track

patterns to play or record in synchronization with the

arpeggiator that’s currently running, the step sequencer, or

the song that’s currently playing.

Sync is off: If the Trigger Mode setting is set to Start

Immediately, the Drum Track pattern will be triggered the

moment you press the DRUM TRACK button. If this is set

to Wait KBD Trigger, the Drum Track pattern will be

triggered the moment you play the keyboard. The Drum

Track will not synchronize with the arpeggiator that’s

currently running, the step sequencer, or the song that’s

currently running.

Sync is on: The Drum Track will be triggered at one-

measure intervals in synchronization with the song that’s

currently running. The Drum Track will be triggered at one-

beat intervals in synchronization with the arpeggiator that’s

currently running or the step sequencer (in Sequencer mode

if the song is stopped).

Note: If you want to synchronize the arpeggiator to the

Drum Track function that’s currently running, adjust settings

for Key Sync (P-ARP> SETUP, C-ARP> A, B, S-ARP> A,

B).

Synchronization with song stop

Synchronization with a song in Sequencer

mode

• When you press the SEQUENCER (START/

STOP) button, the Drum Track function will stop as well

as the sequencer.

• If you want the Drum Track function to start

simultaneously with the start of recording, press the

DRUM TRACK button during the pre-count before

recording (if Trigger Mode is set to Start Immediately)

or play the keyboard (if Trigger Mode is Wait KBD

Trigger). The Drum Tracks will not be triggered

immediately, but will be triggered in synchronization

with the sequencer the moment recording starts.

During last night's gig, my Kross 2 started changing "Favorites" - one after the other - switching through the banks and sounds, while I was playing. What could cause that. It didn't do it all the time, just every now and then at random. Submitted on 4-9-2022 at 00:59
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Korg Kross 2 in the language / languages: English as an attachment in your email.

The manual is 4,35 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Korg Kross 2

Korg Kross 2 User Manual - German - 152 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Korg Kross 2 Manual

Product: