Manual Korg Kross 2 (page 87 of 152) (English)

707348

Zoom out

Zoom in

1/152

Regarding arpeggiator synchronization “Key Sync.” parameter

Dual arpeggiator editing

Here we will use a combination as an example in our

explanation.

The same procedure applies when editing an arpeggio

pattern in Sequencer mode.

If you have entered this mode from the Combination mode,

the arpeggio pattern selected by the combination will be

affected by your editing.

1. In Combination mode, select a combination that uses

the arpeggio pattern that you wish to edit.

For this example, select a combination where both

arpeggiators A and B are assigned.

2. Press the ARP button to turn on the arpeggiator (the

button will light up).

Even if the arpeggiator had been turned off when you

moved here, you can use the ARP button to turn it on.

However, if Arpeggiator Run A or B are not checked,

and if Arpeggiator Assign, is set to off, then the

arpeggiator will not function.

3. Select the ARP PATTERN> SETUP page.

4. Press the ENTER button at Arpeggio Select A or B to

specify the arpeggiator that you want to edit.

If this is A, your editing will apply to the parameters and

user arpeggio pattern of arpeggiator A.

If this is B, your editing will apply to the parameters and

user arpeggio pattern of arpeggiator B.

5. Switch between arpeggiators A and B, and edit their

respective user arpeggio patterns.

If you want to stop one of the arpeggiators, return to

Combination mode, access the COMBI> ARP page and

turn Arpeggiator Run off.

6. To modify the name of a user arpeggio pattern, use the

“Rename Arpeggio Pattern” function. (see page 179 of

the Parameter Guide)

7. If you wish to save the edited user arpeggio pattern in

internal memory, you must write the user arpeggio

pattern.

In this case, both user arpeggio patterns will be written

simultaneously. If you turn off the power without writing,

the edited contents will be lost.

8. If you wish to save the state of the combination at the

same time, return to Combination mode and write the

combination. (see page 122)

Note: When editing a user arpeggio pattern, pay attention to

the global MIDI channel, the channel of each track, and the

arpeggiator assignments, and make sure that the arpeggiator

you are hearing is the pattern that you wish to edit.

Regarding arpeggiator

synchronization

“Key Sync.” parameter

The timing of the arpeggiator notes depends on the state of

the arpeggiator Key Sync. check box.

If this box is checked, the arpeggiator will start running at

the first note-on that occurs after you’ve taken your hands

completely off the keyboard.

If this box is unchecked, the arpeggiator will run in

synchronization with the internal/external MIDI clock.

Below, we will explain how synchronization occurs when

the Key Sync. check box is not checked (Synchronization

with Song Start and with MIDI realtime Start messages are

excluded).

Synchronization between arpeggiators

A and B

In Combination and Sequencer modes, the two arpeggiators

can run simultaneously. In this case, if one arpeggiator is

already running, and you then run the other arpeggiator (with

“Key Sync.” unchecked), the second arpeggiator will

synchronize to the “ (Tempo)” based on the first

arpeggiator.

If Key Sync. is checked, arpeggiators A and B will run

independently, each at their own tempo.

Synchronization with the drum track

If you want the arpeggiator to synchronize to the drum track

pattern that’s currently playing, uncheck the Key Sync.

setting. In this case, the arpeggiator will synchronize to the

beat of the drum track pattern that’s currently playing.

Note: If you want the drum track pattern to synchronize to

the arpeggiator that’s currently running, turn on the “Sync”

setting (the Trigger parameter of the DRUM TRACK>

PATTERN page of each mode).

Synchronizing with the step sequencer

If you want the arpeggiator to synchronize with the loop

pattern being played by the step sequencer, clear the Key

Sync check box. In this case, the arpeggiator will

synchronize with the beat based on the loop pattern that’s

currently playing.

Synchronization between the arpeggiator

and sequencer in Sequencer mode

If song playback is stopped

• The arpeggiator will synchronize to the “ (Tempo)”

based on the internal MIDI clock timing.

While playing back or recording a song

• The arpeggiator will synchronize to the beat based on the

timing of the song.

During last night's gig, my Kross 2 started changing "Favorites" - one after the other - switching through the banks and sounds, while I was playing. What could cause that. It didn't do it all the time, just every now and then at random. Submitted on 4-9-2022 at 00:59
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Korg Kross 2 in the language / languages: English as an attachment in your email.

The manual is 4,35 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Korg Kross 2

Korg Kross 2 User Manual - German - 152 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Korg Kross 2 Manual

Product: