707348

Korg Kross 2 Manual

82
Zoom out
Zoom in
Previous page
1/152
Next page
Arpeggiator function
76
Select the arpeggiator(s) that will run
Use the Arpeggiator Run setting to enable the arpeggiator(s)
that you want to use. The arpeggiator(s) that this is on will
run when the ARP button is on.
However, the arpeggiator will only play a timbre if the table
next to the check boxes assigns arpeggiator A or B to a
timbre: T 1–16. You change these settings in C-ARP>
ASSIGN page Arpeggiator Assign. (see page 76)
Arpeggiator-A, Arpeggiator-B
For each arpeggiator A and B, you can adjust settings for
Pattern Select, Resolution, Octave, Sort, Latch, Key
Sync, and Keyboard. (see page 74)
Arpeggiator settings in Combination
and Sequencer modes
In Combination and Sequencer modes, you can use two
arpeggio patterns simultaneously, thanks to the KROSS’s
dual arpeggiator functionality. The settings in each of these
modes are adjusted in a similar way.
The following example shows how to adjust settings in
Combination mode.
The dual arpeggiator functionality lets you do the following
things.
• Assign an arpeggiator for each timbre. Choose from Off,
(arpeggiator) A, or (arpeggiator) B. →step 5
• Independently specify whether A and B will run.
→step 6
• Select an arpeggio pattern and set parameters
independently for A and B. →step 7
• Select Scan Zone page settings so that you can use the
keyboard range or playing velocity to switch between
normal playing and arpeggiated playing, or to switch
between arpeggiators A and B. →step 8
• Adjust settings for timbres that will be silent when the
arpeggiator is Off, and will sound only when the
arpeggiator is On. →step 10
Arpeggiator settings
1. Select COMBI> PROG page.
Select programs for the timbres that you wish to use. For
this example, select any desired program for timbres 1–4.
For the timbres that you want to use, set their Status to
INT. For this example, set Status to INT for timbres 1–4,
and Off for timbres 5–16.
2. Access the C-TIMBRE> MIDI page.
Set the MIDI Channel to match the Gch or global MIDI
channel (set in G-MIDI> BASIC page MIDI Channel).
For timbres 1–4, set MIDI Channel to Gch.
3. Access the C-ARP> ASSIGN page.
4. Set “Temp” to specify the tempo.
This is the same as for a program. However, the tempo is
shared by both arpeggiators A and B.
5. Adjust “ARP Assign” settings.
Assign arpeggiator A or B to the desired timbres. Each
timbre will be played by the arpeggiator that has been
assigned to it.
6. In the C-ARP> A, B pages, set the Run (Arpeggiator
Run) parameter.
Turn this on for the arpeggiator(s) that you want to use.
The arpeggiator(s) checked here will run when the ARP
button is turned on.
With the settings shown in the display for steps 2 and 3,
turning the ARP button on will cause arpeggiator A to
run for timbre 1, and arpeggiator B to run for timbres 2
and 3. When the ARP button is turned off, timbres 1–4
will sound as a layer.
If all timbres ARP Assign status are set to Off, or if Run
(Arpeggiator Run) is unchecked, the arpeggiator will not
function.
7. On the C-ARP> A, B pages, set the parameters for
arpeggiators A and B.
The parameters for A and B are the same as for a
program. (see page 74)
8. In the Scan Zone A/B page, specify the range in which
arpeggiators A and B will function.
The parameters for A and B are the same as for a
program.
You can use keyboard ranges or velocity ranges to use
one or both of the arpeggiators, or to switch between
arpeggiators A and B. By using the C-ZONE/DELAY>
KEY ZONE, and VEL ZONE page to set keyboard and
velocity ranges in conjunction with each other, you can
create even more variations.
9. If you wish to save the edited combination settings in
internal memory, turn off memory protect in Global/
… 82 …


Need help? Post your question in this forum.

Forumrules
1

Forum

korg-kross-2

Reset search

  • During last night's gig, my Kross 2 started changing "Favorites" - one after the other - switching through the banks and sounds, while I was playing. What could cause that. It didn't do it all the time, just every now and then at random. Submitted on 4-9-2022 at 00:59

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Korg Kross 2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Korg Kross 2 in the language / languages: English as an attachment in your email.

The manual is 4,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Korg Kross 2

Korg Kross 2 User Manual - German - 152 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info