707348
70
Zoom out
Zoom in
Previous page
1/152
Next page
Sequencer
64
Song editing
You can apply a variety of editing procedures to a song. The
available types of editing procedures are listed below.
Song
Load (Save) Template Song: Loads a song template into
the song (or saves a song as a template). (see page 59)
Copy From Combination/Copy From Program:
Copies
the settings of the specified combination/program to the
settings of the song that’s currently selected.
Copy From Song: This command copies all of the settings
and musical data from the specified song to the song that’s
currently selected.
Rename song: Renames the selected song. You can enter up
to 24 characters.
Delete Song: This command deletes the currently selected
song.
FF/REW Speed: This allows you to set the speed at which
fast-forward or rewind will occur.
GM Initialize: This command transmits a GM System On
message to the Sequencer mode, resetting all MIDI tracks to
the GM settings.
Set Song Length: This command changes the length of the
specified song.
Tracks
Event Edit: Here you can edit individual events of MIDI
data.
Erase Track: This command erases the data from the
specified track.
Copy/Bounce Track: The Copy Track command copies
musical data from the copy source track to the specified
track. The Bounce Track command combines the musical
data of the bounce source and bounce destination tracks, and
places the combined data in the bounce destination. All
musical data in the bounce source will be erased.
Erase Measure: This command erases the specified type(s)
of musical data from the specified range of measures. The
Erase Measure command can also be used to remove only a
specific type of data. Unlike the Delete Measure command,
executing the Erase Measure command does not cause the
subsequent measures of musical data to be moved forward.
Delete Measure: This command deletes the specified
measures. When the Delete Measure command is executed,
the musical data following the deleted measures will be
moved towards the beginning of the sequence.
Insert Measure: This command inserts the specified
number of measures into the specified track. When you
execute the Insert Measure command, the musical data
following the insert location will be moved backward.
Repeat Measure: This command repeatedly inserts the
specified measures for the specified number of times. When
you execute the Repeat Measure command, the measures
will be inserted following the measure specified by To End
of Measure, and musical data following the inserted data
will be moved backward.
Copy Measure: This command copies the measures of
musical data specified as the “From” source to the beginning
of the measure specified as the “To” location. When you
execute the Copy Measure command, the existing track data
at the copy destination will be rewritten.
Move Measure: This command moves the specified
measures of performance data to another measure.
Create/Erase Control: The Create Control command
creates control change, aftertouch, pitch bend, or tempo data
in the specified region of a MIDI track or the tempo track.
The Erase Control command erases data such as control
changes, aftertouch, pitch bend, or tempo in the specified
range.
Quantize: This command corrects the timing of MIDI data
of the type you specify (note data, control change,
aftertouch, pitch bend, program change, etc.) in the
track.You can also adjust for swing.
Shift/Erase Note: This command shifts (moves) or erases
the specified note numbers in a specified MIDI track and
range of measures.
Modify Velocity: This command modifies the velocity
values of notes in the specified area so that they will change
over time according to a selected curve.
Rename Track: This command renames the selected track.
You can enter up to 24 characters.
70


Need help? Post your question in this forum.

Forumrules
1

Forum

korg-kross-2

Reset search

  • During last night's gig, my Kross 2 started changing "Favorites" - one after the other - switching through the banks and sounds, while I was playing. What could cause that. It didn't do it all the time, just every now and then at random. Submitted on 4-9-2022 at 00:59

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Korg Kross 2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Korg Kross 2 in the language / languages: English as an attachment in your email.

The manual is 4,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Korg Kross 2

Korg Kross 2 User Manual - German - 152 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info