Manual Korg Kross 2 (page 67 of 152) (English)

707348

Zoom out

Zoom in

1/152

Recording Recording MIDI in real time

Recording MIDI in real time

When you’ve finished with the “Preparations for recording”

section you can start recording.

This is a method of recording what you’re playing on the

keyboard and your controller usage, in real time. This

method of recording is normally used one track at a time,

and is called single track recording.

As an alternative, multitrack recording allows you to

simultaneously record multiple channels of data onto

multiple tracks. This is the method you will use when using

the Drum Track function, the Step sequencer function, and

the arpeggiator to record multiple tracks of musical data at

once, or when you play back existing sequence data on an

external sequencer and record it onto KROSS’s sequencer in

real time.

Recording setup

In SEQ> REC page Recording Setup, select the realtime

recording method that you want to use.

Overwrite

By default, this recording method is selected.

This will record your performance by overwriting any

previously recorded data. All data following the measure

where you start recording will be erased.

Normally you will use this method to record, and then

modify the results by using other types of real-time

recording or MIDI event editing.

1. Use Track Select to choose the track that you want to

record.

Play the keyboard; you’ll hear the selected track.

2. Set the Recording Setup to Overwrite.

3. Press the SEQUENCER (REC) button, and then

press the SEQUENCER (start/stop) button.

If the Metronome Setup is still set to the default settings,

the metronome will sound for a two-measure pre-count,

and then recording will begin. Play the keyboard and

move controllers such as the Modulation wheel to record

your performance.

4. When you finish playing, press the SEQUENCER

(start/stop) button.

Recording will end, and the location will return to the

point where you started recording.

The following recording setup parameters are also available.

Overdub

Select this method if you wish to record additional

performance data by overdubbing it without erasing the

previously-recorded data.

Manual punch-in

Select this method when you wish to use the SEQUENCER

(REC) button or a foot switch to re-record selected

portions of a previously-recorded track.

Auto punch-in

Select this method when you wish to automatically re-record

selected portions of a previously-recorded track.

Then, recording will occur only over the specified area

(Auto Punch In Start Measure–Auto Punch In End

Measure), rewriting it with the newly recorded data.

Loop (Loop All Tracks)

Select this method when you wish to repeatedly record over

a specified area of a track, while continuing to add data. This

is suitable for creating drum patterns, etc.

For details, please see “An example of realtime recording”.

Multi Rec (multitrack recording)

Use MIDI multi-track recording if you want to

simultaneously record multiple tracks of different channels,

such as when recording the output of the drum track,

arpeggiator or Step sequencer functions, or when recording

from an external multi-track sequencer.

Recording resolution

Set the “REC Resolution” if necessary. When you record in

real time on a track, this parameter specifies how the timing

of the recorded MIDI data will be corrected.

Adjust these settings in the SEQ> REC page.

For example if REC Resolution is set to , the timing of your

realtime-recorded notes will be automatically adjusted as

shown in section “2” of the following illustration whenever

it varies from 8th note intervals.

If REC Resolution is set to Hi, the notes will be recorded

with the timing at which you play them.

Tip: To correct already-recorded data, use the Quantize

function.

First, access the S-TRACK EDIT >SELECT MEASURE

TO EDIT page. Then specify the target of quantization and

the range of measures, and select the Quantize function.

Specify the steps that will be corrected and the strength of

correction, and then apply quantization. If you want to return

to the state prior to quantizing, use the Undo function from

the function list.

Track Select

LOOP (Loop All Tracks)

Multi REC

Recording Setup



 

      

During last night's gig, my Kross 2 started changing "Favorites" - one after the other - switching through the banks and sounds, while I was playing. What could cause that. It didn't do it all the time, just every now and then at random. Submitted on 4-9-2022 at 00:59
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Korg Kross 2 in the language / languages: English as an attachment in your email.

The manual is 4,35 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Korg Kross 2

Korg Kross 2 User Manual - German - 152 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Korg Kross 2 Manual

Product: