707348

Korg Kross 2 Manual

63
Zoom out
Zoom in
Previous page
1/152
Next page
Playing back Playback methods
57
3. Turn on Track Play Loop.
Use the cursor button ▲ to select the parameter, and
press the ENTER button to add a check mark.
If a check mark is shown, the specified region of
measures will loop during playback or recording.
4. Turn on Play Intro.
Use the cursor button ▼ to select the parameter, and
press the ENTER button to add a check mark.
If a check mark is shown, playback will start from the
first measure of the intro, and then the specified region of
measures will repeat.
5. Set the Loop Start to M005, and the Loop End to
M008.
Use the cursor button ▼ to select each parameter, and use
the VALUE dial to specify the value.
6. Using the procedure described above, adjust settings
for track 10 as shown in the illustration below.
If you play back from the first measure with the settings
shown in the screenshot above, the specified region of
measures will repeat as follows.
If Play Intro is unchecked, the specified region of measures
will repeat as follows.
Changing the volume, and pan settings of
each track
In the SEQ> MIX page you can change the volume, and pan
settings of each track.
Muting a specific track/Monitoring a specific
track (Mute/Solo functions)
The KROSS provides a Mute function that lets you silence
specified tracks between 1–16, and a Solo function that lets
you hear the specified track or channel by itself. These
functions can be used in various ways. For example you can
intentionally mute or solo specific tracks, or listen only to
the rhythm section of the previously-recorded tracks while
you record new tracks. Let’s try out the Mute and Solo
functions.
1. Press the SEQUENCER (start/stop) button.
2. Access the SEQ> MIX page. Press the PAGE+ or
PAGE+ button to select the page.
3. Use the cursor ▲ button to select Sound.
4. Use the cursor buttons ◄► to select the track that
you want to mute. Select track 1.
5. Press the ENTER button to switch between Play and
Mute.
The display will change from P (Play) to M (Mute), and
the playback of track 1 will no longer be heard. In this
way, the “mute” function allows you to silence a
specified track until the track is un-muted.
6. Press the cursor ► button to select track 2, and press
the ENTER button to switch it to Mute.
The playback of track 2 will also be muted. To cancel
muting, press the ENTER button again.
7. Turn on Solo for track 1.
Press the FUNCTION button, select Solo Setting from
the menu, and press the OK button. The Solo Setting
dialog box will appear.
Use the cursor button ▼ to select Solo, and use the cursor
button ◄ to select Track 01. When you press the ENTER
button to add a check mark, the screen will indicate (S);
now you’ll hear only the playback of track 1. In this way,
you can play only a specific track that you want to hear.
If both Mute and Solo are used, the Solo function will be
given priority.
Use the cursor button ► and the ENTER button to turn
Solo on for track 2. The indication will change, and
you’ll hear the playback of tracks 1 and 2. MIDI tracks 3–
16 will not be heard.
8. To turn off the Solo feature, press the ENTER button
once again. Turn off Solo for MIDI tracks 1 and 2.
The display will change, and the playback of tracks 1 and
2 will be muted. If the Solo function is turned off for all
tracks, playback will be according to the Sound settings.
The Solo is not stored when you save the song.
Measures 1 2 3 4 5 6 7 8 9 10 11 12 13
Track 1
1234567856785
Track 10
9109109109109109109
Measures 1 2 3 4 5 6 7 8 9 10 11 12 13
Track 1
5678567856785
Track 10
9109109109109109109
Track Play Loop: On Play Intro: OnTrack Select: 01
Loop Start: M005 Loop End: M008
Track Play Loop: On Play Intro: OTrack Select: 10
Loop Start: M009 Loop End: M010
… 63 …


Need help? Post your question in this forum.

Forumrules
1

Forum

korg-kross-2

Reset search

  • During last night's gig, my Kross 2 started changing "Favorites" - one after the other - switching through the banks and sounds, while I was playing. What could cause that. It didn't do it all the time, just every now and then at random. Submitted on 4-9-2022 at 00:59

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Korg Kross 2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Korg Kross 2 in the language / languages: English as an attachment in your email.

The manual is 4,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Korg Kross 2

Korg Kross 2 User Manual - German - 152 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info