707348
43
Zoom out
Zoom in
Previous page
1/152
Next page
Detailed Editing with Programs Basic oscillator settings
37
2. Select Stereo as the Multisample Bank for
multisample1 and multisample2.
There are two main types of Multisample Banks: Mono,
and Stereo. Note that stereo Multisamples will require
twice as many voices as mono Multisamples.
3. Select the multisample.
Multisamples are organized by category such as piano,
guitar, bell, etc. Choose the Multisample Select parameter
and press the ENTER button to see the list. Use the cursor
buttons ◄► to switch categories, use the cursor buttons
▼▲ to select a multisample, and press the ENTER
button to confirm your choice.
There are three types of multisamples: ROM, RAM, and
option. For each type, you can select either mono (M) or
stereo (S) multisamples. Note that stereo multisamples will
require twice as many voices as mono multisamples.
ROM multisamples are internal preset sounds, and can
always be used. They are organized by categories such as
piano, guitar, and bell.
RAM multisamples can be used by converting samples that
you sampled using the pad sampler.
Option multisample banks can be used if you have loaded
option multisamples. The menu shows only the currently-
loaded option banks.
4. In the same way, select multisample 2 in the P-OSC>
MS2 page. Select a different Multisample than what
was selected for multisample1.
Multisamples have now been assigned to multisample 1
and 2.
5. Specify the velocity range and crossfade range.
Set the multisample 2 “Threshold Velocity” to 001, and
turn “Crossfade” Off.
6. In the P-OSC> MS1 page, set the velocity range
(Bottom Vel.) to 80 for multisample 1.
With these settings, Multisample2 will sound for notes
played with a velocity of 79 or less, and Multisample1
will sound for notes played with a velocity of 80 or
greater.
The Velocity Zone shows the oscillator’s four
multisamples and the velocity zones of each oscillator.
The meter on the left shows the note-on velocity. This lets
you see which multisample and oscillator will sound for
that specific velocity.
7. Set the multisample 1 “Xfade” to 20, and its “Curve”
to Linear.
The state of this split is shown visually in the screen.
The two multisamples will fade across the range from 80
to 100, with multisample 2 fading-out while multisample
1 fades-in. This produces a smooth change without any
sudden switch.
8. As needed, use the P-OSC> MS1 page and MS2 page
to adjust the Level of the two multisamples.
Using a drum kit
What is a drum kit?
A drum kit is a collection of drum set samples such as bass
drum, snare, or cymbal, as well as a variety of other
percussion sounds, with a sample assigned to each key.
You’ll use Global/Media mode to create and edit a drum kit.
Up to four drum samples can be assigned to each note of the
keyboard, and you can use the BottomVel., Xfade, and
Curve parameters to specify how you’ll switch between
these samples. Then, in Program mode, you can adjust filter
and amp settings, and specify effects and routing to the audio
output jacks. (see page 111)
To use a drum kit in a Program, set Oscillator Mode to
Drums, and choose one of the 58 user drum kits or the 9
GM2 drum kits.
Selecting a drum kit
1. Access the P-BASIC> VOICE page.
2. Set “OSC (Oscillator Mode)” to Drums.
3. Select a drum kit in the P-OSC> DKit page.
4. Specify the basic pitch of the oscillator. For a drum
kit, set “Octave” to +0 [8'].
Category
Velocity Zone
Meter
Level
43


Need help? Post your question in this forum.

Forumrules
1

Forum

korg-kross-2

Reset search

  • During last night's gig, my Kross 2 started changing "Favorites" - one after the other - switching through the banks and sounds, while I was playing. What could cause that. It didn't do it all the time, just every now and then at random. Submitted on 4-9-2022 at 00:59

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Korg Kross 2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Korg Kross 2 in the language / languages: English as an attachment in your email.

The manual is 4,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Korg Kross 2

Korg Kross 2 User Manual - German - 152 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info