707348
9
Zoom out
Zoom in
Previous page
1/152
Next page
Front and rear panels Front panel
3
QUICK SPLIT DIALOG
The currently selected program is assigned to the high range and
a program of the bass category is assigned to the low range.
Select the split program, swap the high and low programs if
desired, and adjust settings such as the split point, volume, and
octave. By pressing the MENU (WRITE) button you can save the
settings to a user combination bank. (see page 30)
10. AUDIO REC (Audio recorder)
Here is where you can control the audio recorder, which lets you
record and play back your KROSS performance or signal from an
external audio input. You can execute functions such as play,
stop, or record, and adjust various settings for the recorder.
To control the audio recorder, use the AUDIO REC
(play/pause) button and the four buttons below the AUDIO
RECORDER SETUP window.
In order to use the audio recorder, you’ll need a SD card
(separately sold).
(play/pause) button ( )
This is a dedicated button that executes the recorder playback (or
record) and pause functions. In any mode, this button lets you
immediately play (or record) or pause. The state of the light and
color of the button indicates the operating status of the recorder.
If you hold down the EXIT button ( ) and press the
(play/pause) button ( ), the AUDIO
RECORDER SETUP window appears.
11. Display
This shows the parameters and settings of the KROSS, as well as
a variety of other information.
Pages:
Each screen of parameters or information is called a
“page.” To edit or adjust the settings of the KROSS, you’ll access
the page that contains the desired parameter, and then change its
value.
Dialog box:
The screen that appears when you need to perform a
command function, confirm a result, or recall a temporary
function is called a “dialog box.”
For more about various objects that you’ll see in pages and dialog
boxes, please see page 7.
Adjusting the display contrast
To adjust the contrast of the display, hold down the EXIT button
and turn the VALUE dial. You can also adjust the display contrast
in the Global/Media mode PREF 1 page. (see page 117)
12. Functions / Page controller
You’ll use these buttons to access pages in the display, and to
select or execute functions that provide convenient commands in
each page. The functions of the four buttons will change
according to the page or dialog box that’s currently shown.
FUNCTION button
This button shows a function list containing convenient
commands on each page.
PAGE– button
PAGE+ button
Use these two buttons to move between pages in order to select
the page that you want to see. The page name or tab that’s
displayed on the upper part of the page indicates the currently
shown page.
MENU button
This button displays the page menu for each mode, allowing you
to select a page.
Operations while a dialog box is shown
While a dialog box is shown, the function of these four buttons
will change so that you can perform tasks that are appropriate for
that dialog box. The functions assigned to the buttons are shown
in the bottom of the display.
For example, suppose that you’re in Program mode and press the
FUNCTION button to access the function list.
The functions that are assigned to the four buttons are shown in
the bottom of the dialog box.
If you press the CLOSE (actually FUNCTION) button, the dialog
box will close and you’ll return to the previous page.
Press the
(actually PAGE–) button or
(actually PAGE+)
button to select a function.
Press the OK (actually MENU) button to open or execute the
selected function.
For example if you select Write Program and press the MENU
(OK) button, the WRITE PROGRAM dialog box will appear.
Here, the FUNCTION (CANCEL) and MENU (OK) functions
are assigned to the two buttons.
13. Value Controller
Use these to edit in the display. You’ll use these to move the
cursor and select parameters, to edit values, and also to execute or
cancel commands.
VALUE dial
Edit the value of the parameter (edit cell) where the cursor is
located.
Tips:
You can adjust the contrast of the display by holding down
the EXIT button ( ) and turning the VALUE dial.
EXIT button ( )
Use this button to cancel the execution of a function or the change
in a parameter value, or to close a dialog box.
You’ll also use this to move to the first page (such as the MAIN
page) within the mode.
Unlit: Stopped
Lit green: Playing
Blinking green: Playback is paused
Lit red: Recording
Blinking red: Recording is paused
Blinking orange: Recording is paused
(waiting for Auto input)
9


Need help? Post your question in this forum.

Forumrules
1

Forum

korg-kross-2

Reset search

  • During last night's gig, my Kross 2 started changing "Favorites" - one after the other - switching through the banks and sounds, while I was playing. What could cause that. It didn't do it all the time, just every now and then at random. Submitted on 4-9-2022 at 00:59

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Korg Kross 2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Korg Kross 2 in the language / languages: English as an attachment in your email.

The manual is 4,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Korg Kross 2

Korg Kross 2 User Manual - German - 152 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info