707341
297
Zoom out
Zoom in
Previous page
1/305
Next page
Disk and Media information Restoring the factory settings
289
Restoring the factory settings
Restoring the original sounds
You can easily restore the Programs, Combinations, Drum
Kits, Wave Sequences, Set Lists, and EXs samples to their
original state as shipped from the factory. This is done by
loading the PRELOAD.PCG file, which is included both on
Accessory Disc 3 and the internal disk.
This operation will erase all of the internal KRONOS
sounds. If there are any non-factory sounds that you want
to keep, save them to disk now! For more information,
see “Saving data” on page 199.
Make sure that Memory Protect is off
Before loading, make sure that Memory Protect is turned
off:
1. Press the front-panel GLOBAL button.
2. Go to the Basic tab of the Basic Setup page.
3. Make sure that all of the Memory Protect check-boxes
are not checked.
Loading from the internal disk
Generally, it will be more convenient to load sounds from
the internal disk:
1. Press the DISK button to enter Disk mode.
2. Go to the Load tab of the File page.
3. Use Drive Select to select HDD.
The LCD screen will show the files and folders on the
internal disk.
4. Touch the FACTORY folder to select it.
5. Press the on-screen Open button.
The LCD will now show the contents of the FACTORY
folder.
6. Select the PRELOAD.PCG file.
7. Press the Load button.
The Load PCG dialog box will appear.
8. Use “.PCG Contents” to select the data you want to
load. To completely restore the factory sounds, select
All.
“All” will load all of the factory sounds, including Programs,
Combinations, Set Lists, Drum Kits, Wave Sequences, and
Drum Track patterns.
For more information on the factory sounds, see “Program
bank contents” on page 31, “Combination bank contents” on
page 67, “Drum Kit memory structure” on page 195, and
“Wave Sequence banks” on page 187.
9. Set “.KSC Allocation” to Clear All.
10.Set the Load Method for EXs and User Sample Banks
to KSC Settings.
11.Press the OK button to load the data.
Next, to make sure that the KSC loads automatically at
startup:
12.Go to the Global Basic—KSC Auto-Load page.
13.In the list of KSCs, check the Auto-load box next to
PRELOAD.KSC.
14.Un-check all of the other KSCs.
Loading from Accessory Disc 3
If the sounds have somehow been erased from the internal
drive, you can also load them from Accessory Disc 3:
1. Insert the included Accessory Disc 3 into a connected
USB DVD drive.
2. Press the DISK button to enter Disk mode.
3. Wait for a few seconds, to give the KRONOS time to
recognize the disk.
4. Go to the Load tab of the File page.
5. Use Drive Select to select CDD.
The LCD screen will show the files and folders on the disk.
6. Follow the instructions in steps 4 through 14 under
“Loading from the internal disk,” above.
Never attempt to remove media while data is being
loaded.
297


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Korg Kronos at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Korg Kronos in the language / languages: English as an attachment in your email.

The manual is 6,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Korg Kronos

Korg Kronos User Manual - German - 305 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info