707341
292
Zoom out
Zoom in
Previous page
1/305
Next page
Appendices
284
No unused WAVE files found
Meaning: When you executed the Disk Utility page menu
command Delete Unused WAVE files, no unused WAVE
files were found.
O (Obey copyright rules–Oscillator)
Obey Copyright Rules
Meaning: When you execute the Disk mode Make Audio
CD page Write to CD command, or when you execute
Destination in the Sampling mode Audio CD page
Destination command.
Please read “COPYRIGHT WARNING” on page 3 of the
Quick Start Guide before you use this data.
Oscillator Mode conflicts (Check PROG
P1)
Meaning: In Sampling mode when you executed Convert
MS To Program with Use Destination Program Parameters
checked, the conversion destination program Oscillator
Mode setting did not match.
In Program mode, set the Oscillator Mode of the
conversion destination program. If converting a
monaural multisample, select Single. If converting a
stereo multisample, select Double.
P (Pattern–Program)
Pattern conflicts with events
Meaning: It was not possible to execute the Bounce
operation because one of the tracks contained a pattern, and
the same measure of the other track contained events or a
pattern.
Open the pattern.
Pattern exists across destination to-end-
of-measure or source from-measure
Meaning: When moving a measure, the edit operation could
not be executed because a pattern had been put in the
destination end measure or the source start measure, and had
not been opened.
Open the pattern.
Pattern exists in destination or source
track - Open pattern?
Meaning: A pattern has been placed in the track that you
specified as a destination or source for editing. If you wish to
open the pattern and execute (the events of the pattern will
be copied), press the OK button. If you wish to execute
without opening the pattern, press the Cancel button.
Pattern used in song - Continue?
Meaning: When editing, the specified pattern has been
placed in a track. If you wish to execute, press the OK
button. If you decide not to execute, press the Cancel button.
Program Bank Type conflicts
Meaning: When receiving a dump of an individual bank or a
single program, the KRONOS received a program that did
not match the bank type. If the bank type does not match, the
program will not be received.
Meaning: When receiving an All Programs dump, the
KRONOS received a bank whose bank type did not match.
Only banks of the matching bank type will be received.
Use the Set Program Bank Type command (on the
Global P0 Basic Setup page) to change the bank type so
that it’s the same as the one being transmitted, and then
try the operation again.
Program Type conflicts
Meaning: This message will appear when you execute Copy
Tone Adjust if the copy-source and copy-destination
program types are different. You cannot copy between HD-1
and EXi Programs, or between different types of EXi
Programs.
Q (Quick Layer/Split function)
Quick Layer/Split Caution
Meaning: This message may appear when you execute the
Quick Layer or Quick Split function.
“There is not enough empty slot to copy Layer's IFX.”
This message appears if there are not enough insert effect
slots, so that the insert effect settings of the layer/split
program cannot be copied.
“Main’s active T# was replaced for Layer.”
“Main’s active T# was replaced for Drum Track.”
292


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Korg Kronos at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Korg Kronos in the language / languages: English as an attachment in your email.

The manual is 6,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Korg Kronos

Korg Kronos User Manual - German - 305 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info