707347
25
Zoom out
Zoom in
Previous page
1/36
Next page
Making Settings on the i3
25
Settings Mode
Making Settings on the i3
Setting mode: basic method of use
To make settings on the i3, use Setting mode. The basic method
of operation is shown below.
1.
Press the SETTING button.
The button will light, and the i3 will enter Setting mode.
2,4
1
5
3
2.
Use the dial or the +/– buttons to select the parameter
you want to configure.
3.
Press the q button to move the cursor to the value.
4.
Use the dial or the +/– buttons to select a value.
5.
After you are finished with the settings, press the EXIT
(SHIFT) button to return to Performance mode.
Note:
The settings will be retained even after the power is
turned off.
Main settings
Changing the pedal polarity
If the pedal connected to the FOOT CONTROLLER jack works
the opposite from the intended way (the sound sustains when
lifting your foot off the pedal), you will need to change the i3’s
pedal polarity setting so that the pedal works normally.
1.
Connect the pedal switch to the FOOT CONTROLLER jack.
2.
In SETTING mode, use the dial or the +/– buttons to select
“Pedal Polarity”.
3.
Press the q button to move the cursor to the value.
4.
Turn the dial to change the polarity.
– (KORG): This is the factory default setting. Use this set-
ting when using a PS-1, PS-3 or DS-1H pedal.
+ (Reverse): Use this setting when the pedal appears to be
working in reverse.
5.
Press the EXIT (SHIFT) button to return to performance
mode.
Changing the pedal function
Follow the steps below to change the function of the pedal
connected to the FOOT CONTROLLER jack.
1.
Connect the pedal to the FOOT CONTROLLER jack.
2.
In SETTING mode, use the dial or the +/– buttons to select
“Pedal Function”.
3.
Press the q button to move the cursor to the value.
4.
Turn the dial to select the pedal function.
No Assign: Select this when you are not using a pedal.
Damper: This is the factory default setting. Select this
when using a pedal switch like the Korg PS-1, PS-3 or DS-1H.
Expression: Select this when using an expression pedal like
the Korg EXP-2.
5.
Press the EXIT (SHIFT) button to return to performance
mode.
Setting the battery type
To make sure the correct battery level is displayed, set which
type of battery you are using.
1.
In SETTING mode, use the dial or the +/– buttons to select
“Battery Type”.
2.
Press the q button to move the cursor to the value.
3.
Turn the dial to select the type of battery you have inserted.
Alkaline: alkaline batteries
Ni-MH: nickel-metal hydride batteries
4.
Press EXIT (SHIFT) to return to performance mode.
Changing the auto power-off function
The i3 has an auto power-off function that automatically turns
off the power when the unit has not been played or operated
for a certain length of time. The time interval is set to 4 hours
at factory default, but this can be changed.
1.
In SETTING mode, use the dial or the +/– buttons to select
Auto PowerOff”.
2.
Press the q button to move the cursor to the value.
3.
Turn the dial to select “Disable” or “4 Hours”.
4.
Press the EXIT (SHIFT) button to return to performance
mode.
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Korg i3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Korg i3 in the language / languages: English as an attachment in your email.

The manual is 3,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Korg i3

Korg i3 User Manual - German - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info