500314
97
Zoom out
Zoom in
Previous page
1/108
Next page
97
8. Appendix
8. Appendix
Troubleshooting
Nothing appears in the display when I
press the POWER switch
[ ] Is the AC/AC power supply connected?
[ ] Is the AC/AC power supply plugged into the wall?
No sound
[ ] Are your amp, mixer, or headphones connected to
the correct jacks? (Can you play patterns? If so, the
connections are OK.)
[ ] Are you amp and/or mixer turned on, and set cor-
rectly?
[ ] Is the ESX-1’s master volume knob turned up?
Sound does not stop
[ ] If for some reason the sound will not stop, you can
switch between
Pattern mode and Song mode to stop the sound.
[ ] If a note is “stuck” when you are playing the ESX-
1 via MIDI, hold down the SHIFT key and press
the STOP/CANCEL key to perform a MIDI Reset.
[ ] When playing a pattern, the selected pattern will
continue repeating.
When you have finished listening to it, press the
STOP/CANCEL key.(p.35)
The sound or operation is not the way I
edited it
[ ] Did you execute the Write operation after editing?
(p.34, 74, 83, 84)
After editing, you must execute the Write opera-
tion before switching songs or patterns, or before
turning the power off.
Can’t control the ESX-1 via MIDI
[ ] Is the MIDI cable connected correctly?
— When playing the ESX-1 from an external device
[ ] Is the ESX-1 set to receive MIDI data on the chan-
nel that the external device is transmitting? (p.90)
[ ] Is the Global mode MIDI Channel parameter set to
the channel you want to use? (p.90)
[ ] Are the Global mode MIDI Filter settings appro-
priate? (p.91)
— When playing an external device from the ESX-1
[ ] Is the ESX-1 set to transmit MIDI data on the chan-
nel that the external device is receiving? (p.90)
[ ] Are the Global mode MIDI Filter settings appro-
priate? (p.91)
Can’t write a pattern or song
[ ] The Global mode Memory Protect setting may be
turned “On.” (p.85)
Pressing the step keys doesn’t play the
specified sound
[ ] Did you perform the Write operation after editing
the sound of the part?
[ ] Is the Keyboard switch turned on?
[ ] Is a motion sequencer operating? (p.68)
Can’t use SmartMedia™
[ ] Could the SmartMedia™ have been formatted on
a device other than the ESX-1?
If the SmartMedia™ was formatted on a computer
or digital camera, you must format it on the ESX-1
before use. (p.87)
[ ] Is the SmartMedia™ inserted correctly?
Turn off the power and re-insert the SmartMedia™
correctly. (p.84)
Sound is distorted
[ ] Is the TUBE GAIN knob set to the minimum posi-
tion?
97


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Korg ESX-1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Korg ESX-1 in the language / languages: English as an attachment in your email.

The manual is 3,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info