500314

Korg ESX-1 Manual

74
Zoom out
Zoom in
Previous page
1/108
Next page
74
Copying a pattern
You can use the Write operation to copy a pat-
tern to a different pattern number than the cur-
rently selected program.
1, 4
1
2
2
STOP/CANCEL
Saving a pattern
If you want to keep a pattern that you edited or created, you must perform the
Write/Rename operation explained below. When you perform the Write/Rename
operation, the “Copying data within a pattern” operation will be performed
automatically depending on the length of the pattern.
If you decide not to save a pattern you create
Simply switch patterns without performing the Write/Rename operation.
Saving by overwriting an existing pattern
1. Press the WRITE/RENAME key.
The parameter display will indicate “WriteTo,” and the value dis-
play will indicate “(the sa ve-destination patter n number ).” At this time
you can press the SHIFT key to change the display from “(the sa ve-
destination patter n number )” to the corresponding “(six char acters of
the pattern name ).”
To overwrite onto a different pattern
Use the dial to change the pattern number to the desired save-desti-
nation. Be sure to select a pattern number that does not contain im-
portant data you want to keep.
2. Press the WRITE/RENAME key to begin saving. The WRITE/RE-
NAME key will light while the data is being saved, and will go dark
when the operation is completed. If you decide to cancel, press the
STOP/CANCEL key. When the data has been saved, the save-desti-
nation pattern number will be selected.
Be aware that when you write a pattern in this way, the pattern data
in the save-destination will be overwritten.
You will not be able to write if the Global mode Memory Protect set-
ting (☞p.83 “Protecting the data in memory”) is on. In this case, turn
off the Global mode Memory Protect setting before you write.When
shipped from the factory, memory protect is turned on.
Never turn off the power while data is being written into memory (i.e.,
while the Write/Rename key is lit). Doing so may destroy the data.
Saving a pattern under a different name
1. Hold down the shift key and press the WRITE/RENAME key. (The
key will blink.) The parameter display will indicate “Rename,” and
the value display will show “(six characters of the pattern name )”.
2.
Assign the name for the pattern that you want to save.
Use the [ ]/[ ] cursor keys to move the cursor to left or right in the
parameter display, and turn the dial to edit the parameter name. You
can assign a name of up to eight characters to the pattern. When you
have finished assigning the name, press the WRITE/RENAME key.
3. Select the save-destination pattern number.
The parameter display will indicate “WriteTo,” and the value dis-
play will indicate “(save-destination pattern number ).”
4. Press the WRITE/RENAME key to begin saving the data. The
WRITE/RENAME key will light while the data is being saved, and
will go dark when saving is complete.If you decide to cancel, press
the STOP/CANCEL key.When saving is complete, the save-desti-
nation pattern number will be selected.
If you saved while playing back, the playing pattern will not change.
If you had initiated the saving process while a pattern was playing
back, and you then canceled the save operation, playback will not
stop when you press the STOP/CANCEL key. Playback will stop if
you press the STOP/CANCEL key once again after canceling.
… 74 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Korg ESX-1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Korg ESX-1 in the language / languages: English as an attachment in your email.

The manual is 3,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info