500314
70
Zoom out
Zoom in
Previous page
1/108
Next page
70
Checking motion sequence data
Here's how you can check and see what type of motion sequence data has been
recorded. Hold down the shift key and press the motion sequence key of the part
common section, and the step keys will light to indicate the motion sequence data
that has been recorded. The display will indicate “FreeMot” and the number of
remaining motion sequences that you can still record.
If a motion sequence is recorded for The following key will light
Part Common section knobs Step keys 1 and 2
Filter section Step key 3
Part Common section keys Step key 4
Effect 1 motion sequence (Fx Edit 1 data) Step key 5
Effect 1 motion sequence (Fx Edit 2 data) Step key 6
Effect 2 motion sequence (Fx Edit 1 data) Step key 7
Effect 2 motion sequence (Fx Edit 2 data) Step key 8
Effect 3 motion sequence (Fx Edit 1 data) Step key 9
Effect 3 motion sequence (Fx Edit 2 data) Step key 10
Modulation knobs Step key 11
Modulation keys Step key 12
You cannot check the motion sequence data during playback or re-
cording, or while playing a pattern set.
Editing motion sequence data
Here's how you can edit motion sequence data for each part or effect. You can edit
the data for each single step.
Selecting the motion sequence that you want to edit
MOTION DEST ...................................................................***
1. Select the part containing the motion sequence data that you want
to edit.
2. Press the step edit key (the key will light).
3. Press the [ ] cursor key to until the display reads “MotDest.”
4. Turn the dial to select a parameter for which a motion sequence has
already been recorded for the currently selected part.
If you want to select a parameter for which a motion sequence has
not yet been recorded for the currently selected part, hold down the
shift key while you turn the dial.
When selecting “MotDest,” you can hold down the shift key and use
the dial to select a parameter for which a motion sequence has not yet
been recorded, and then use MOTION VALUE to edit the values.
Editing motion sequence parameter values
MOTION VALUE ................................................................. ***
1. Press a part key to select the part that you want to edit.
2. Press the step edit key (the key will light).
3. Use the [ ]/[ ] cursor to select “MotValue” in the display
4. The display will alternately show the name of the parameter you
selected in “Selecting the motion sequence that you want to edit”
(see above) and the value of that parameter.
5. Press a step key to select the step that you want to edit. If the pattern
has a length of two measures or greater, use the [ ][ ] keys to dis-
play the desired step.
70


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Korg ESX-1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Korg ESX-1 in the language / languages: English as an attachment in your email.

The manual is 3,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info