500314
49
Zoom out
Zoom in
Previous page
1/108
Next page
49
5. Pattern mode
REVERSE .....................................................................On, Off
Switches reverse playback for the sample on (lit) or off (dark).
Modulation
These parameters apply time-variant change to the sound, using an
LFO or EG.
SPEED........................................................................0...127
Adjusts the speed of modulation. If BPM SYNC is on, the speed will
synchronize to the tempo. The range is 8/1~1/64.
DEPTH ...................................................................... -63...+63
Adjusts the depth of modulation.
TYPE................................................... , , , ,
Selects the type of modulation.
Settings other than EG will apply cyclic modulation. If you select
EG, the effect will be at maximum when the note begins, and will
then gradually decrease.
If the modulation type is “ ,” the modulation phase will be not
reset when the note is triggered. For other types, the phase will be
reset by each trigger.
DEST .............................................. PITCH, CUTOFF, AMP, PAN
Selects the parameter to which modulation will be applied.
You cannot select “PITCH” for the audio-in part.
BPM SYNC ..................................................................On, Off
Turn this on if you want the modulation cycle to synchronize to the
tempo. This will light when synchronized.
The sounds of drum parts 6A and 6B can be edited independently,
but cannot be played simultaneously.
If the sound does not change when you turn the knobs or switch the
keys, either those knobs or keys are not valid for this part, or a Mo-
tion Sequence (p.68 “Motion Sequence”) is running.
Filter
Here you can modify the tone of the waveform generated by the
oscillator by distorting or filtering it.
CUTOFF ...................................................................... 0...127
Adjusts the cutoff frequency of the filter. The result will depend on
the type of filter selected.
With some settings, the sound may be distorted, or there may be
almost no sound.
EG INT ..................................................................... -63...+63
Specifies the depth and direction in which the EG (envelope genera-
tor) will change the cutoff frequency. The EG will start the moment
the trigger turns on (i.e., the moment you press the step key). If the
knob is in the center position, the EG will not affect the sound.
If the gate time length of a step extends beyond the beginning of the
next step, the EG will not be retriggered when the next step is
sounded.
RESONANCE .............................................................. 0...127
Emphasizes the region around the cutoff frequency, adding a dis-
tinctive character to the sound. With the resonance raised, you can
move the cutoff knob or adjust EG INT or EG TIME to produce the
"meow" sound typical of analog synthesizers.
Depending on the cutoff frequency or the pitch you play, high set-
tings of resonance may distort the sound.
49


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Korg ESX-1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Korg ESX-1 in the language / languages: English as an attachment in your email.

The manual is 3,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info