500314
11
Zoom out
Zoom in
Previous page
1/108
Next page
11
2. Parts and their functions
Edit section
1
23
4
1. EFFECT
In this section you can select the type of effect and
adjust various parameters.
: supports motion se-
quence.
TYPE (effect type): Selects the type of effect.
FX EDIT1 (effect edit 1) : Adjusts the effect. The
actual parameter being controlled will
depend on the effect type.
FX EDIT2 (effect edit 2) : Adjusts the effect. The
actual parameter being controlled will
depend on the effect type.
FX CHAIN (effect chain): On the ESX-1, the output
of one effects processor can be fed to the
input of another. The connection will
change each time you press this, and the
connection that is lit will be used.
EDIT SELECT: Chooses which effects processor is
currently being edited.
MOTION SEQ. (motion sequence): Records and
plays back movements of the FX EDIT1
and FX EDIT2 knobs. This will alternate
between on (lit) and off (dark) each time
it is pressed.
2. PART COMMON
These are the parameters that are common to the
drum parts and to the keyboard parts.
: supports
motion sequence.
MOTION SEQ. (motion sequence): Turning this
function on will allow you to record and
playback knob movements for each part.
This key will change successively be-
tween on (SMOOTH lit), on (TRIG
HOLD lit), and off (dark) each time it is
pressed.
PITCH/GLIDE : For a drum part, this knob sets
the pitch. For a keyboard part, it speci-
fies the time it takes for the pitch to
change smoothly between two legato
notes.
EG TIME : Adjusts the envelope time (the time it
takes for the note to decay) for each part.
PAN (panpot) : This controls the position of the
part in the stereo field for the line out-
puts (L/MONO, R) or headphones. If a
part is set to the individual (3/4) output
bus (p.26: Output bus) this control will
adjust the panning to the individual out-
puts (INDIV. OUT 3, 4).
LEVEL : Adjusts the volume of each part. For an
accent part, this will adjust the strength
of the accent.
START POINT : Sets the playback start point for
the sample assigned to each part.
AMP EG : Selects the amp envelope shape for each
part. The envelope will alternate be-
tween (decay) or (non-decay) each
time you press this.
ROLL : For each part, this will switch the roll ef-
fect on (lit) or off (dark).
FX SELECT (effect select) : Selects which effect
processor will be applied to each part.
If FX SEND is on, the selected effect will
be applied. This setting is ignored for
parts whose output bus (p.42: Output
bus) setting is 3/4.
FX SEND (effect send) : Selects whether the sound
of the current part will be sent to the se-
lected effect. This will alternate between
on (lit) and off (dark) each time it is
pressed. This setting is ignored for parts
whose output bus (p.42: Output bus)
setting is 3/4.
REVERSE : Selects whether reverse playback will
be used for each part. This will alternate
between on (lit) and off (dark) each time
it is pressed.
3. MODULATION
These are the parameters such as LFO and EG that
create time-varying changes in the sound.
: sup-
ports motion sequence.
SPEED : Adjusts the modulation speed.
DEPTH : Adjusts the modulation depth.
TYPE (modulation type) : Selects the type of
modulation.
DEST (destination) : Selects which parameter will
be affected by the modulation.
BPM SYNC : Turning this on (lit) will cause the
modulation to be in sync with the cur-
rent tempo.
4. FILTER
These parameters modify the tonal character of the
part.
: supports motion sequence.
CUTOFF : Adjusts the cutoff frequency of the fil-
ter.
EG INT (EG intensity) : Adjusts the depth of the
filter envelope.
RESONANCE : Adjusts the resonance of the fil-
ter.
TYPE (filter type) : Selects the type of filter.
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Korg ESX-1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Korg ESX-1 in the language / languages: English as an attachment in your email.

The manual is 3,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info