707345
13
Zoom out
Zoom in
Previous page
1/76
Next page
Otherseings 13
Other settings
STYLE/[MUSIC STYLE] button
SETTING/[EFFECT] button [SHIFT] button Battery indicator
Dial
Using this instrument with batteries
YoucanuseeightAAalkalineornickel-metalhydridebaeries
to power this instrument.
Zinc-carbonbaeriescannotbeused.
Note:
Baeriesarenotincluded,sopleaseobtainthem
separately.
Installing batteries
1. Make sure that the power on this instrument is turned o.
2. Push the two tabs on the baery compartment cover that is
located on the boom of this instrument to open the cover.
Note:
When turning the instrument upside down, place it
on a blanket or similar material to prevent damage to the
display, joystick and so on.
3. When inserting the baeries, be sure to observe the correct
polarity (“+” and “–”).
Do not mix new and old
baeries,orbaeriesofdierent
types. Failing to observe this
guideline might cause the
baeriestoleakorburst.
4. Close the baery cover.
Note:
In order to get accurate
readingsoftheremainingbaerypower,setthetypeofbaery
being used (see the Owner’s Manual, PDF for details).
Replacing the batteries
Abaeryindicatorisshownattheupperright-handcornerof
the display.
Note:
This indicator will not be displayed when the instrument
is connected to an AC adapter.
Whentheindicatorisblinking,thismeansthatthebaeriesare
nearlydepleted,soreplacethebaeriesassoonaspossibleor
connect an AC adapter to power this instrument.
Removedepletedbaeriesimmediately.Leavingdepleted
baeriesincouldresultinmalfunctionscausedbybaery
electrolyte leakage or similar problems. Also, remove the
baeriesifyouwillnotbeusingtheEK-50foralongtime.
Changing the auto power-o function
Thisinstrumenthasanautopower-ofunctionthat
automaticallyturnsothepowerwhentheunithasnotbeen
played or operated for a certain length of time. The time interval
is set to 30 minutes at factory default, but this can be changed.
1. Press the SETTING/[EFFECT] buon to enter the seings
function.
2. Press the CATEGORY buon u several times to select
Auto PowerO.”
3. Turn the dial to select “Disable” or a specic time after
which the power will turn o.
4. Press the [SHIFT] buon to return to the previous mode.
Changing the pedal polarity
If the sound does not sustain when you press the pedal
connected to the rear panel of this instrument, but the sound
doessustainwhenyoutakeyourfooto,youwillneedto
changetheEK-50’spedalpolarityseing.
1. Press the SETTING/[EFFECT] buon to enter the seings
function.
2. Press the CATEGORY buon u several times to select
“Pedal Polarity.”
3. Turn the dial to change the polarity.
− (KORG):Thisisthefactorydefaultseing.Usethisseing
when using a DS-1H, PS-1 or PS-3 pedal.
+ (Reverse):Thisseingreversestheeectmadewhen
operating the pedal.
4. Press the [SHIFT] buon to return to the previous mode.
13


Need help? Post your question in this forum.

Forumrules
1

Forum

korg-ek-50

Reset search

  • My grand piano has no volume and the ‘keyboard set’ is flashing Submitted on 10-6-2021 at 12:22

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Korg EK-50 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Korg EK-50 in the language / languages: English, German, French, Spanish as an attachment in your email.

The manual is 11,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Korg EK-50

Korg EK-50 User Manual - English - 33 pages

Korg EK-50 User Manual - German - 33 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info