488493
7
Zoom out
Zoom in
Previous page
1/40
Next page
7
12
FUNCTION button
To edit one of the parameters printed on the front
panel in red, hold down this button and operate the
corresponding knob or button. For example, you can
edit the speed of the modulation effect by holding
down this button and using the MODULATION
DEPTH buttons.
13
MASTER (CANCEL) buttons
These buttons adjust the overall volume of the
AX10B (MASTER).
When the AX10B is ready to write (store), pressing
either of these buttons will cancel the Write operation
(CANCEL).
14
WRITE button
Use this button to write (store) a program.
When you press this button, the AX10B will enter
write-ready mode; if you press this button again,
the program will be written (stored). (p.12)
15
PEDAL FX/BANK HOLD button
This button selects the effect that will be controlled
by the expression pedal (Pedal Effect).
Each time you press the button, the LED will change
color to indicate the pedal effect that will be con-
trolled.
ORG: OCTAVE (orange): Octave
RED:MOD (red):
The effect selected by MODULATION
GRN:AMB (green):
The effect selected by AMBIENCE
OFF:VOLUME (dark): Volume pedal
If something other than OCTAVE is selected for the
pre-effect, you cannot use the PEDAL FX button to
select OCTAVE.
By holding down the FUNCTION button and pressing
this button, you can select bank hold mode as the
way in which programs will be selected (BANK
HOLD). Refer to Selecting programs: b (p.9).
16
Expression pedal
You can use the expression pedal to control effects
or volume. By advancing the pedal all the way
forward you can switch the selected pedal effect on/
off.
17
PEDAL LED
This LED will light if the expression pedal is active.
18
ORIGINAL VALUE LED
This LED will light if the edited value is identical to
the saved (original) value.
19
Program select switches DOWN/BANK DOWN, UP/
BANK UP BYPASS, TUNE
Use these switches to select programs. You can
select programs in one of three ways. Refer to
Selecting programs (p.9).
If you press the UP and DOWN switches simulta-
neously, the effects will be bypassed and the tuner
will operate (BYPASS) (p.9).
Rear panel
20
INPUT L/H select switch
Set this switch according to the pickup output of your
bass.
H: High-output basses with active circuitry
L: Low-output basses
21
INPUT jack
Connect your bass to this jack. Use a 1/4" mono
plug. If the AX10B is running on batteries, the power
will come on when you plug into this jack.
If the AX10B is running on batteries, the power will
not come on if a 1/4" stereo plug is inserted.
22
OUTPUT jack
Connect this jack to your bass amp, recorder, or
headphones.
23
AMP/LINE select switch
Set this to AMP if you are plugging into an amp, or
to LINE if you are plugging into a recorder or using
headphones.
If you are connecting the AX10B to a bass amp that
has a tweeter for extended high-frequency re-
sponse, select the LINE position.
24
DC9V
The separately sold AC adapter can be connected
here (p.8). When this is connected, the power will be
turned on automatically.
You must only use the specified AC adaptor (p.14).
25
Cable hook
If the separately sold AC adapter is used, connect
the cable of the AC adapter around this hook (p.8).
2425 20 21 22 23
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Korg AX10B at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Korg AX10B in the language / languages: English, German, French as an attachment in your email.

The manual is 2,11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info