488492
11
Zoom out
Zoom in
Previous page
1/39
Next page
12
Expression pedal
Selecting the effect that will be controlled by the
pedal
Press the PEDAL FX button to select the effect that
will be controlled by the pedal. The LED located at
the left indicates the effect (or volume) that will be
controlled.
ORG: NOTCH (orange): Notch filter frequency
RED : CHO (red): Chorus effect
GRN:ÎÖB (green): Effect selected by AMBIENCE
OFF : VOLUME (not lit): Volume pedal
Using the pedal to switch the effect on/off
By advancing the pedal all the way forward you can
switch the effect assigned to PEDAL FX on/off. When
on, the LED at the left of the pedal will light. If you’ve
assigned PEDAL FX to VOLUME or NOTCH, the
LED cannot be turned off.
Setting the minimum value of the volume pedal
If PEDAL FX is assigned to VOLUME, you can hold
down the FUNCTION switch and use the MIC &
BODY DEPTH buttons to set the minimum volume
that will be controlled by the pedal (VOL PEDAL
MIN).
Saving the sound of a specific pedal position
If the PEDAL FX is assigned to AMB, CHO, or
VOLUME, there is no way for you to save the sound
produced by operating the pedal. The effect will
always sound according to the current position of the
pedal. However if PEDAL FX is assigned to NOTCH,
you can save the notch filter frequency point speci-
fied by operating the pedal.
NR (Noise Reduction)
To adjust the amount of noise reduction, hold down
the FUNCTION button and turn the tone control
LEVEL (NR) knob.
Depending on the connected device, excessively
high NR settings may cause notes to be cut off. If
this happens, lower the level.
Storing a program
When you have created a sound you want to keep,
you can write (store) it into one of the 40 user
programs (0.1–9.4).
If you switch programs or turn off the power before
writing your edited program, the changes you made
will be lost.
The program that had been in the writing destina-
tion will be overwritten.
1. Press the WRITE button. The program number
will blink in the display, and the AX10A will be in
“write-ready” mode.
2. Use the program select switches to select where
you would like to store the program.
You cannot write to a preset program (01–94).
3. Press the WRITE button to write the program into
the selected program number.
If you decide not to write, press either of the
MASTER (CANCEL) buttons to exit write-ready
mode (display blinking). You will return to normal
operation.
2
3
1, 3
TYPE Explanation Normal PEDAL FX:CHO
CHORUS PEDAL CHORUS
CHORUS Stereo chorus for electric-acoustic.
Effect depth:
0…30
Effect depth
Does nothing
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Korg AX10A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Korg AX10A in the language / languages: English, German, French as an attachment in your email.

The manual is 2,01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info