488491
14
Zoom out
Zoom in
Previous page
1/18
Next page
14
4. Appendices
PEDAL (Pedal effect)
Knob 1 Knob
2
Knob 3 Knob
4
Knob 5 Pedal
TYPE DEPTH/PITCH
MIX/LEVEL
VOLUME 0...10.0 Volume
CHO1 0...10.0
Depth
CHO2 0...10.0 Speed
VIBRATE 0...10.0 Speed
FLANGER 0...10.0 Modulation
PHASER 0...10.0 Speed
TREMOLO 0...10.0 Speed
PAN 0...10.0 Speed
WAH ——Peak Fre.
FILTER 0...10.0 Peak Fre.
RING 0...10.0 Pitch
PITCH -24...24 [
CENT
] 0...10.0 Pitch
F BACK1 0...10.0 Level+Reverb
F BACK2 0...10.0 Level+Reverb
DELAY 10[
ms
]...2[
SEC
] 0...10.0 Effect level
ECHO 10[
ms
]...2[
SEC
] 0...10.0 Delay time
ROOM 0...10.0 Reverb level
GARAGE 0...10.0 Reverb level
HALL 0...10.0 Reverb level
SAMPLE1 S/L Playback
SAMPLE2 S/L Play/reverse
LOOP1 S/L Volume
LOOP2 S/L Loop time
These effect models let you use the expression pedal to control the
effect in realtime. The following parameters are assigned to each
knob.
Knob 1 TYPE Select the effect type
Knob 3
DEPTH/PITCH
Adjusts the depth/Adjusts the pitch
Knob 5 MIX/LEVEL Adjusts the mix balance between the
effect sound and original sound/
Adjusts the level
CHO1PITCH cannot be used simultaneously with the Modu-
lation effect. If you use this effect in a program where the Modu-
lation effect is turned on, the Modulation effect will automati-
cally be turned off.
F BACK 1 and 2 cannot be used simultaneously with the
ROOM1ARENA Ambience effects. If you use these effects in
a program where ROOM1ARENA are turned on, the
ROOM1ARENA effect will be turned off automatically.
DELAYHALL cannot be used simultaneously with the Ambi-
ence effect. If you use this effect in a program where the Ambi-
ence effect is turned on, the Ambience effect will automatically
be turned off.
SAMPLE1LOOP2 cannot be used simultaneously with a
Modulation effect or Ambience effect. If you use the SAMPLE1
LOOP2 effects in a program where a Modulation effect or Am-
bience effect are turned on, that effect will be turned off auto-
matically.
VOLUME (Volume)
This is a volume pedal. Value knob 5 sets the minimum level.
CHO1 (Chorus1)
This is a chorus effect in which the pedal controls the depth of
the pitch modulation.
CHO2 (Chorus2)
This is a chorus effect in which the pedal controls the speed of
the pitch modulation.
VIBRATO (Vibrato)
This is a vibrato effect in which the pedal controls the speed of
the pitch modulation.
FLANGER (Flanger)
This is a flanger in which the pedal controls the bandwidth
(modulation) of the effect.
PHASER (Phaser)
This is a phaser in which the pedal controls the speed of the phase
modulation.
TREMOLO (Tremolo)
This is a tremolo effect in which the pedal controls the speed of
the volume change.
PAN (Panpot)
This is a pan effect in which the pedal controls the speed at which
the position of the sound will change when stereo playback is
used.
WAH (Wah)
This is a wah in which the pedal controls the peak frequency.
FILTER (Resonance Filter)
This is a resonance filter in which the pedal controls the peak
frequency of the filter.
RING (Ring Modulator)
This effect creates a bell-like sound in which the pedal controls
the pitch. To obtain the cleanest effect, use the pickup closes to
the neck, turn down the tone of your guitar, and play near the
12th fret.
PITCH (pitch shifter)
The pedal will control the amount of pitch shift. When value
knob 5 is at "0" only the original sound will be heard. At "5" the
original sound and effect sound will be mixed equally, and at
"10" only the effect sound will be heard.
Feed Back
In this effect, the pedal controls the vibrato that is applied to the
feedback sound.
While sustaining a note on your guitar, advance the pedal to pro-
duce a feedback sound. The feedback sound will disappear when
you return the pedal. Value knob 3 adjusts the speed of the vi-
brato.
There will be no feedback effect if OFF, ACOUSTIC, or CLAS-
SIC COMP is selected for the Drive Amp effect.
F BACK1 (Feed Back1)
A feedback sound will be generated to the pitch of your play-
ing.
F BACK2 (Feed Back2)
A feedback sound will be generated one octave above your
playing.
DELAY (Delay)
In this effect, you can use the pedal to control the input level of
the delay.
By pressing the TAP switch two times, you can set the TIME of
knob 2 to the corresponding tempo.
ECHO (Echo)
This is a echo in which the pedal controls the delay time. As on a
tape echo unit, changing the delay time will also change the pitch.
Value knob 3 adjusts the maximum delay time.
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Korg AX100G at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Korg AX100G in the language / languages: English as an attachment in your email.

The manual is 0,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info