488491
11
Zoom out
Zoom in
Previous page
1/18
Next page
11
4. Appendices
4. Appendices
Adjusting the expression pedal
(Calibration)
If you find the expression pedal difficult to use, perform this pro-
cedure so that the pedal will function optimally. For example if
the effect does not reach maximum when the pedal is advanced
all the way, or does not reach minimum when the pedal is re-
turned all the way, use the following procedure to make the ap-
propriate adjustments.
When making adjustments, use your hand to move the pedal.
Accurate calibration may not be possible if you use your foot to
operate the pedal.
1. Turn on the power while simultaneously holding down the
EXIT switch and the PEDAL switch. The Multi-display will
show “PEDAL” for approximately one second, and will then
indicate “MIN.”
2. Slowly return the pedal to the full back position. When it stops,
release your hand and press the WRITE switch. The Multi-
display will change from “MIN” to “MAX.”
If you decide to halt the adjustment procedure, press the EXIT
switch. The power-on display will appear, and you will enter
Program mode.
3. Slowly advance the pedal. When it stops, release your hand
and press the WRITE switch.
2. press slowly
3. press slowly
The Multi-display will indicate “COMPLT” for approximately
one second. Then the power-on display will appear, and you will
enter Program mode.
After the adjustment procedure has been completed, verify the
operation of the pedal.
Select an effect that will make it easy to verify the adjustment.
For example, set the Pedal effect to the VOLUME effect, set the
value to 0, and check the MIN level when the pedal is returned
all the way.
If you make a mistake during the calibration procedure, the Multi-
display will indicate “
ERROR
,” and you will return to the screen
before the adjustment (the “
MIN
” display). If the “
ERROR
” dis-
play appears for repeated attempts, a malfunction may have oc-
curred. In this case, please contact your dealer.
Restoring the user programs to the
factory settings (Reload)
1. Turn on the power while simultaneously holding down the
EXIT switch and the PROG/FX SELECT switch. The Multi-
display will indicate “RELOAD?
2. Press the WRITE switch. The Multi-display will change to
RELOAD,” and the reload operation will begin. When the
reload operation is completed, the display will indicate
COMPLT” for approximately one second. Then the power-
on display will appear, and you will enter Program mode.
Never turn off the power during the reload operation.
When you perform the reload operation, all user programs will
be rewritten. Rhythm settings will also be initialized.
Troubleshooting
If you suspect a malfunction, please check the following points
first. If this does not resolve the problem, contact a nearby Korg
dealer.
1. Power does not turn on
Are batteries installed? Alternatively, is the AC adapter con-
nected to an AC outlet? (p.5)
Is a mono cable connected to the INPUT jack? (p.5)
2. No sound
Are your guitar, amp, and headphones connected to the cor-
rect jack? (p.5)
Is your amp turned on, and is it set accordingly?
Is one of your connection cables broken?
Has the MASTER VOL (master volume) of the AX100G been
turned down? (p.6)
Is the program level of the AX100G set to “0” or to a low value?
(p.9, 16)
Is the Level of the Drive Amp effects set to “0” or to a low
value?
Is the volume of your guitar turned down?
Is the AX100G muted?
If VOLUME is selected for the PEDAL effect, has the pedal
been returned to the full back position?
3. Effects are not applied
Is the AX100G bypassed? (p.6)
Are the effects used by the program turned on? (p.6)
4. Rhythm does not function
Are you in Program mode or in Effect Select mode? The
rhythm will not function in Phrase Trainer mode.
Is the rhythm output level set to “0”? (p.7)
5. Pedal does not function
Have you selected a program that uses an effect in the PEDAL
effect mode? (p.6)
Is the pedal indicator lit? (p.4, 7)
Try calibrating the expression pedal. (p.11)
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Korg AX100G at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Korg AX100G in the language / languages: English as an attachment in your email.

The manual is 0,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info