580157

Kopp Free Control 293113029 Manual

5
Zoom out
Zoom in
Previous page
1/26
Next page
5
Please read the operating instructions carefully!
Dependable early warning and protection against
burglary is only ensured if this radio magnetic
sensor is used in accordance with the following
instructions.
Application
Monitoring of doors and windows. Detects the ope
-
ning or closing of doors and windows.
Monitoring of objects to prevent unauthorized
removal.
Mounting
Select a suitable mounting location. Drilling guide
exists. Plastic base for height adjustment
.
Before final mounting, please check to ensure that
the intended receiver reliably receives the radio sig
-
nal of the magnetic contact. If necessary, change the
position of the receiver or the magnetic sensor.
The center of the magnet must match the arrow posi
-
tion on the housing of the radio magnetic sensor .
Note: Do not mount on or near metal surfaces (e.g.
hinges, fittings, frames).
Power supply
3 V lithium battery CR 2450.
Battery life up to 2.5 years.
LED blinks 1x when the battery is inserted .
Ensure correct battery polarity.
Battery capacity is monitored.
Recommendation: Replace battery every 2 years
Sabotage contact 
For proper operation, install the housing lid correctly
= sabotage contact closed. A sabotage message is
transmitted in case of attempted sabotage.
External contact
A second monitoring loop in the form of an additi
-
onal contact can be connected . This can be
an additional magnetic contact, reed contact or
other contact. Electronics automatically detect the
additional contact after this has been closed. Radio
magnetic sensor and external contact work synchro-
nously/parallel.
Without external contact:
Terminals
can remain open.
Wire jumper not necessary
.
Status display
LED blinks 1x when the battery is inserted and
then goes out:
• Battery full
• Device ready for operation
LED flashes 1x per minute:
• Battery weak
• Alarm recognition still possible
• Signal broadcast still possible
LED blinks quickly:
• Battery almost empty
• Alarm recognition no longer possible
• Signal broadcast no longer possible
… 5 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kopp Free Control 293113029 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kopp Free Control 293113029 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 1,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info