533098

Konig KN-WS400 Manual

3
Zoom out
Zoom in
Previous page
1/48
Next page
3
3.2 Normal states
1. Hold “Set” for 2 seconds to enter into time setting
2. Click “Alarm” to switch the alarm on/off
3. Hold “Alarm” for 2 seconds to enter into Alarm setting
4. Click “Up” to switch between 12 hr/24 hr
5. Press “Down” to switch between °C/°F
6. When ALARM rings, click “snooze” to enter into the snooze state every 5 minutes
7. Press “Channel” to switch RF channel, CH1 → CH2 → CH3
8. Hold “Channel” key for 2 seconds to clear out all data of current “Channel”
3.3 Time set
1. Hold “Set” key for 2 seconds to enter into time setting
2. The sequence of time setting: Year (2000-2050) → Month → Date → Language → Hour →
Minute → Time zone → Exit
3. There will have 1 Hz fl ashing during setting
4. Press “Set” to confi rm the setting, and enter the next setting state
5. Press “Up” one time, the setting will go ahead for one step; hold the key for 2 seconds, it will
run forward by 8 steps/second.
6. Press “Down” one time, the setting will backward for one step; hold for 2 seconds, it will run
back by 8 steps/second.
7. Moon phase is changed accordingly
8. The system will exit automatically if no key is operated in 8 seconds.
3.4 Alarm set
1. Hold “Alarm” key for 2 second to enter into alarm setting
2. The sequence of alarm setting: Hour → Minute → exit
3. There will have 1 Hz fl ashing during setting
4. Press “Alarm” to confi rm the setting, and enter the next setting state
5. Press “Up” one time, the setting will go ahead for one step; hold the keys for 2 seconds, it will
run forward by 8 steps/seconds.
6. Press “Down” one time, the setting will backward for one step; hold for 2 seconds, it will run
back by 8 steps/second.
7. The system will exit automatically if no key is operated in 8 seconds.
Function and effect
4.1 The receiving function of RF
1. After installing the battery and checking temperature/humidity, it will enter RF receiving state
automatically for 3 minutes.
2. Under normal display mode, hold the “Channel” key for 2 seconds to clear out the channel
information
3. If there is no effective signal with same ID code received for the current channel in 35 minutes,
the temperature of that CH will show “--. -“.
4. The temperature display will resume back when the correct signal is received again
4.2 The function of alarm
1. The BUZZER will ring for 2 seconds as below:
a. 0 – 10 sec.: one “beep” per second
b. 10 – 20 sec.: two “beeps” per second
c. 20 – 30 sec.: four “beeps” per second
d. After 30 sec.: “beeps” continuously
2. When the alarm goes off, click “Snooze” key once to enter states 5 minutes snooze states,
exit if any other key is clicked.
3 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Konig KN-WS400 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Konig KN-WS400 in the language / languages: English, German, Dutch, French, Italian, Swedish, Spanish, Finnish as an attachment in your email.

The manual is 5,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info