533072

Konig KN-WS300 Manual

4
Zoom out
Zoom in
Previous page
1/56
Next page
4
3.4 Alarm set
1. Hold “Alarm” key for 2 second to enter into alarm setting.
2. The sequence of alarm setting: Hour → Minute → exit.
3. There will have 1Hz fl ashing during setting.
4. Press “Up” one time, the setting will go ahead for one step; hold the keys for 2 seconds, it will
run forward by 8 steps/seconds.
5. Press “Down” one time, the setting will backward for one step; hold for 2 seconds, it will run
back by 8 steps/second.
6. Press “Alarm” to confi rm the setting, and enter the next setting state.
7. The system will exit automatically if no key is operated in 8 seconds.
3.5 Temperature alarm setting.
1. Hold “ALERT” 2 second into ALERT setting.
2. Setting sequence: upper limited → lower limit → exit
3. Press “CH” key when setting upper limit and lower limit to change different channel.
4. Default of upper limit is: +70°C, lower limit is -50°C.
5. 1Hz will fl ash during setting.
6. Press “ALERT” key confi rm the end of setting then enter into next setting.
7. Press “Up” one time, the setting will go ahead for one step; hold the keys for 2 seconds, it will
run forward by 8 steps/seconds.
8. Press “Down” one time, the setting will backward for one step; hold for 2 seconds, it will run
back by 8 steps/second.
9. The system will exit automatically if no key is operated in 8 seconds.
10. Alert will automatically turn on when setting is fi nished.
Function and effect
4.1 The receiving function of RF
1. After installing the battery and checking temperature/humidity, it will enter RF receiving state
automatically for 3 minutes.
2. Under normal display mode, hold the “CH” key for 2 seconds to clear out the channel
information.
3. If there is no effective signal with same ID code received for the current channel in 35 minutes,
the temperature of that CH will shows “--.-“.
4. The temperature display will resume back when the correct signal is received again.
4.2 The function of alarm
1. The BUZZER will ring as below:
a. 0 – 10 sec.: one “beep” per second
b. 10 – 20 sec.: two “beep” per second
c. 20 – 30 sec.: four “beep” per second
d. After 30 sec.: “beep” continuously
2. When ringing, click “SNOOZE” key once to enter into 5 minutes snooze mode, exit if any other
key is pushed.
4.3 The function of temperature and humidity
1. The indoor temperature display range: 0°C ~ +50°C (32°F ~ +122°F)
2. The indoor humidity display range: 20%-95%
3. Sampling period: 15 seconds.
4. The temperature sampling will be held when the alarm is ringing
… 4 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Konig KN-WS300 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Konig KN-WS300 in the language / languages: English, German, Dutch, French, Italian, Swedish, Spanish, Finnish as an attachment in your email.

The manual is 1,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Konig KN-WS300

Konig KN-WS300 User Manual - Dutch - 6 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info