570523

Konig Electronic VID-TRANS510KN Manual

3
Zoom out
Zoom in
Previous page
1/8
Next page
3
Rear view receiver:
1.
2.
3.
1. DC power input (9 VDC)
2. AV output (white: audio left, red:
audio right, yellow: video)
3. ON/OFF switch
Operation:
1. Connect the transmitter with the AV cable to the output of VCR, DVD or SAT.
2. Connect the receiver with the AV cable to the input of TV, LCD screen or Plasma.
3. Connect the adapter plug of the AC/DC adapter into the transmitter and the receiver and connect
the power plug into a 230 Volt wall outlet. Note: use the provided adapters only.
4. Select on the transmitter and receiver the desired channel with the channel button. Note: In case of
possible distortion, try another channel. For optimum performance, it could be necessary to point
the transmitter and receiver to each other in an imaginary straight line. Or replace the transmitter
and/or receiver a bit, a few centimeters/inches could already be enough to improve the sound and
picture quality. If the reception is perfect, no adjustments are necessary.
5. Turn on the connected equipment and enjoy wireless reception.
Using the remote control feature:
The 5.8 GHz system not only allows you to send audio/video from one area to another, it also gives you
the ability to control the source by using your existing remote control device. It converts the infrared (IR)
signal emitted by your remote control to a a radio frequency (RF) signal in the UHF band at the receiver
and sends it back to the transmitter where the RF signal is converted back to the original IR signal and
beamed to the audio/video source.
Use the IR cable and connect the 2.5mm plug to the input jack on the back of the transmitter (IR). Place
the IR sensor on the front of the display from the equipment that need to be controlled. It’s important to
place the IR sensor as close as possible to the IR sensor, which is behind the display, of the equipment.
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Konig Electronic VID-TRANS510KN at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Konig Electronic VID-TRANS510KN in the language / languages: English, Portuguese as an attachment in your email.

The manual is 1,99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info