508780
3
Zoom out
Zoom in
Previous page
1/85
Next page
3
Product and user description:
1. ALARM indicator
2. TEST button
Testing the smoke alarm
Like any other electronic device, smoke alarms are not foolproof. Smoke alarms contain electronic
components that can fail or wear out at any time.
We recommended that you test the smoke alarm every week to make sure it is working properly.
Push and hold the test button until the alarm sounds for a few seconds. The (red) alarm indicator (1) and
(green) learn indicator (4) will flash for a moment. If the alarm does not sound, check if the battery indicator
flashes once every 45 seconds. If this is not the case and testing fails, please replace the batteries
immediately.
Battery indicator
The battery indicator flashes every 45 seconds to show that the smoke alarm is working properly. When the
battery indicator flashes and gives a short beeping sound, it indicates that the battery has a low capacity
and should be replaced immediately.
3. LEARN button
Follow the next steps to set the MAIN smoke alarm and ASSISTANT smoke alarm(s) to create a smoke
alarm system with 2 or more SEC-SA200's.
1. Press the LEARN button two times. The LEARN indicator turns from red to green. This smoke alarm will
be the MAIN smoke alarm. Ensure the LEARN indicator is green before proceeding.
2. Press the LEARN button of the ASSISTANT smoke alarm(s) once. The ALARM indicator(s) turns on red.
Ensure the ALARM indicator(s) are red before proceeding.
3. Press the TEST button of the MAIN smoke alarm for several seconds in order to send out the learn
signal to the ASSISTANT smoke alarm(s). The ALARM indicator flashes and the smoke alarm sounds.
The ASSISTANT smoke alarm(s) receive the signal and sounds.
4. Press the TEST button on each ASSISTANT smoke alarm(s) for several seconds in order to send out
the learn signal to the MAIN smoke alarm. The MAIN smoke alarm receives the signal and sounds.
Note: the number of smoke alarms is unlimited. The maximum range between 2 smoke alarms to
communicate with each other is 40 metres.
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Konig Electronic SEC-SA200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Konig Electronic SEC-SA200 in the language / languages: English, German, Dutch, French, Italian, Swedish, Spanish, Finnish as an attachment in your email.

The manual is 1,76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info