508751

Konig Electronic SEC-PCC30 Manual

57
Zoom out
Zoom in
Previous page
1/62
Next page
56
Router Configuration
DVR Video Server uses the port 1350, 1351, 1353, 1355, and 1357 to communicate
with the Remote Client Software. So users have to map the Port mentioned above
from Video Server to the public. In this sample users have to map ports shown above
of 192.168.0.22 to the public ports: 1350, 1351, 1353, 1355, and 1357.
Please refer to Chapter 2.2 for detail information about the setup of port mapping in
the router.
DDNS
When you access internet and run DVR system by dynamic IP, it is suggested that
you should use the DDNS Client to define a domain name via internet. This
application will update the newest IP address from your DVR system to DDNS server
every 10 minutes. You just have to type your register hostname to get the internet
connection, if your DVR system IP address is changed.
This application uses port 80 and 81 to upload IP info to internet. If your DVR system
is built under router or firewall, please make sure that port 80 and 81 are already
enabled. DDNS Client is able to upload Global IP address only. If your system uses
virtual IP address, users please map the port 80 and 81communication port to DVR
server.
Register Dynamic DNS name
… 57 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Konig Electronic SEC-PCC30 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Konig Electronic SEC-PCC30 in the language / languages: English as an attachment in your email.

The manual is 4,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info