508751
19
Zoom out
Zoom in
Previous page
1/62
Next page
18
notification will work only in the valid time period in the week schedule setup by user..
[Schedule of E-Mail Notification]: The E-Mail notification will be enabled according
to the week schedule setup by user here. There are two kinds of event types can be
notified via E-Mail: Motion Detect & Sensor Detect.
Note:
Please refer to Chapter 8.5 Motion detect setting” for detail information about E-Mail
notification of event of motion detect.
Please refer to Chapter 8.6 Sensor setting for detail information about E-Mail
notification of event of sensor detect.
[Schedule of IP notification]: When there is event triggered, the image will be sent
out to the IP address specified here. And the IP notification will be enabled according
to the week schedule setup by user here.
The PC in remote site must also install the “Event Center” to retrieve the image
transferred from the server. Please refer to “Chapter 9 Event Center” for the detail
information about installing Event Center in Remote Site PC.
.
[Schedule of Phone notification]: The Phone notification will be enabled according
to the week schedule setup by user here. The system will dial out with voice message
when there is event (Motion Detect & Sensor Detect) triggered.
Note:
Please refer to “Chapter 8.5 Motion detect setting” for detail information about Phone
notification of event of motion detect.
Please refer to “Chapter 8.6 Sensor setting” for detail information about Phone
notification of event of sensor detect.
Please refer to “Chapter 8.2 User Setting” for the telephone number setup.
[Schedule of Event Video Recording]: The Video Clip with event log will be
enabled only according to the week schedule setup by user here.
Note:
Please refer to “Chapter 8.5 Motion detect setting” for detail information about enable
video clip with event of motion detect.
Please refer to Chapter 8.6 Sensor setting for detail information about enable video
clip with event of sensor detect.
7.1.2. Clear Data
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Konig Electronic SEC-PCC30 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Konig Electronic SEC-PCC30 in the language / languages: English as an attachment in your email.

The manual is 4,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info