Manual Konig Electronic SEC-DVRWCA10 (page 3 of 56) (English, German, Dutch, French, Italian, Swedish, Spanish, Finnish)

508737

Zoom out

Zoom in

1/56

Stamp Date Format: Select YY/MM/DD, DD/MM/YY or

MM/DD/YY. Use the arrow down button to adjust the

settings.

Motion Detection Sensitivity: Select the sensitivity of the

motion detector from 1 to 5. Use the arrow down button to

adjust the setting. (5 is the most sensitive setting, 3 is

recommended).

Light Frequency (Hz): Select the light frequency for your

country. For example, 50 Hz for Europe,60 Hz for United

States. Use the arrow down button to select.

Image Quality: Select the recording quality, High-HD,

Standard or Low VGA. Use the arrow down button to

select.

Overwrite: If the SD card must be overwritten when it is full,

then select ON. If overwritten is not preferred, then select OFF. Use the arrow down button to select.

Bell: When you want to hear a peep sound when pushing the buttons on the remote control or clock,

select ON. If not, select OFF. Use the arrow down button to select.

After adjusting all settings, click on SAVE and push the SET button on the back side of the camera

for 3 to 5 seconds to store the settings in the clock.

Clock Installation:

1. Find a desired location for the clock, near a

wall. The recommended height is around

2 meters.

Note: the camera is mounted inside the clock with

a 17 degree downward angle. The view of the

angle of the lens is 45 degrees.

2. Connect the AC/DC adapter.

Note: view the recorded files after installation to

determine whether the installation height and

angle of view meets requirements.

Operation:

1. Insert an AA 1.5 V battery in

the battery compartment of the

clock.

Set the time with the

adjustment wheel.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Konig Electronic SEC-DVRWCA10 in the language / languages: English, German, Dutch, French, Italian, Swedish, Spanish, Finnish as an attachment in your email.

The manual is 2,36 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Konig Electronic SEC-DVRWCA10 Manual

Product: