508779
3
Zoom out
Zoom in
Previous page
1/63
Next page
3
REMARKS:
WHEN HOUSEHOLD CLEANING SUPPLIES OR SIMILAR CONTAMINANTS ARE USED, THE
AREA MUST BE WELL VENTILATED.
THE FOLLOWING SUBSTANCES CAN AFFECT THE CO SENSOR AND MAY CAUSE FALSE
ALARMS AND DAMAGE TO THE SENSOR:
METHANE, PROPANE, ISO-BUTANE, ISO-PROPANOL, ETHYL ACETATE, HYDROGEN SULFIDE
DIOXIDES, AND ALCOHOL BASED PRODUCTS, PAINTS, THINNERS, SOLVENTS, ADHESIVES,
HAIR SPRAY, AFTER SHAVE, PERFUME AND OTHER CLEANING AGENTS.
USING THE DETECTOR
The unit will emit a “beep” sound and the red LED will flash once as a power up. The unit will start to
detect CO within 90 seconds of the batteries being installed.
Normal conditions: If there is no CO present, the green power LED will flash once every 30 seconds.
Alarm conditions: If the unit detects CO the alarm pattern will sound (3 short beeps) and the red LED
will flash for as long the CO remains at a dangerous level.
Silence function: If required, the audible alarm can be silenced by pressing the “Test” button. The
detector will re-activate after 30 seconds if CO remains present.
End of battery life: When the battery is run down, the unit will “beep” once every 30 seconds. The
green LED will continue to flash every 30 seconds.
Alarm memory feature: If you leave the property for a long period and in your absence the alarm has
activated, the unit will memorize the activation. On returning to the property press the “Test” button for
several seconds, the red LED will flash 3 times every 30 seconds if the alarm has activated in your
absence. The property should be immediately ventilated and the cause of the alarm investigated and
rectified. Pressing the “Test” button again will return the unit to normal operation.
End of sensor life: When the sensor comes to the end of its life, the yellow LED will flash
continuously and the alarm will sound.
WHAT TO DO IF THE ALARM SOUNDS
If the alarm sounds:
Immediately open windows and doors to ventilate the property
Call the Emergency Services
If possible, turn off and stop using any fuelled appliances
Evacuate the property
Do not re-enter the property until the cause of CO has been detected and isolated, and the
detector has returned to normal operation
Seek medical assistance for anyone suffering from, or suspected to be suffering from the effects of
carbon monoxide poisoning
Do not use fuelled appliances until they have been assessed and cleared by a competent
professional
CO SAFETY TIPS
Have any heating systems, vents, chimneys and flues inspected annually by a competent
professional
Always install appliances according to the manufacturer’s instructions and adhere to local building
regulations
Most appliances should be installed by a professional and inspected after installation. Regularly
examine vents, chimneys and flues for improper connections, rust/stains and cracks
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Konig Electronic SEC-CA10 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Konig Electronic SEC-CA10 in the language / languages: English, German, Dutch, French, Italian, Swedish, Spanish, Finnish as an attachment in your email.

The manual is 0,91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info