Manual Konig Electronic SAT-SDFTA11BL (page 6 of 16) (English)

508791

Zoom out

Zoom in

1/16

INSTALLATION

Installation menu

1. Press OK key or ▲ key to pop up the "Input Password" dialogue. You can not enter into

the menu unless the correct password is inputted. The default password is "0000". (The

password may be turned off in the parental lock option in system setup.)

2. Press ▲/▼ keys to move the cursor up or down.

3. Press EXIT key to exit.

2.1 Antenna Connection

Press keys to select between Motor Antenna and Fixed Antenna.

2.2 Satellite List

1. Press ▲/▼ keys to choose the satellite. Press OK key to select and mark, press OK key

again to cancel the selection and the mark.

2. If there is no satellite, the red colour and blue colour keys will be invalid.

3. Press red colour key to pop up the Edit Satellite window. Press ▲/▼ keys to move

cursor up or down.

Name: User numeric keys to change the name of the satellite, please refer to the Edit

Channel Name.

Longitude: You can press keys to switch between east longitude and west longitude. After

pressing OK key, you can use numeric keys to edit the longitude, press EXIT key or the

▲/▼ keys to exit editing mode. The range of the longitude is from 1 to 180 degrees. If

beyond this range, system will inform you "out of range" when you press yellow colour key

on the RCU.

After setting, press yellow colour key to save and exit, while press blue colour key to exit

without saving.

4. Press green colour key to pop up the Add Satellite window. Since the same operation

as the above Edit Satellite window, here we don't explain any more.

5. Press blue colour key to pop up the dialogue "Are you sure to delete?". Select Yes

button and press OK key to delete the selected satellite. You can cancel this operation by

pressing OK key at the NO button.

2.3 Antenna Setup

Part A: Fixed

Suppose that you have selected Fixed Antenna in the Antenna Connection window.

1. Satellite: All selected satellites in the satellite list are displayed in this item. Press keys

to select the satellite in circle. Or press OK key to pop up the dropdown list, then select the

desired satellite in the list and press OK key to confirm.

2. LNB Freq, Transponder, DiSEqC1.0, DiSEqC1.1: The same operation as the

above.

3. 22K, 0/12V, Toneburst, LNB Power: You can press keys to select in circle.

English Deutsch Français Nederlands

Italiano Español Magyar Suomi Svenska Česky

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Konig Electronic SAT-SDFTA11BL in the language / languages: English as an attachment in your email.

The manual is 0,44 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Konig Electronic SAT-SDFTA11BL

Konig Electronic SAT-SDFTA11BL User Manual - German - 19 pages

Konig Electronic SAT-SDFTA11BL User Manual - Dutch - 20 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Konig Electronic SAT-SDFTA11BL Manual

Product: