626877

Konig Electronic SAS-SET DVR35 Manual

29
Zoom out
Zoom in
Previous page
1/58
Next page
ENGLISH
29
¾ Buzzer time: you can set how long the buzzer will sound when motion is detected (o,
10s, 30s, 40s, 60s).
¾ Send Email: Allows you set the alarm images is issued to a specied email.
¾ Full screen Alarm: The function is defaulted to “On”. When the motion is detected, the
corresponding channel will be switched to the full screen mode.
¾ Record Channel: the record channel will be activated when the object move is detected.
¾ Post Recording: you can set how long alarm record will last when alarm ends
(30s,1minutes, 2minutes, 5minutes).
¾ Copy: allow you copy current channel parameters to any other channel or all channels.
Picture 5-43
The channel will be separated into a 44x36 grids
(PAL/NTSC mode). When any object moves into the
motion detection area, and the area where the object
is located is displayed in red and motion detection
will be triggered. In the semi-transparent area the
motion detection is not activated.
After conguring the above parameters, click <OK>
to save it.
5.2.5.2 Alarm Set
Click [Main MenuAlarmAlarm] to enter into the below window shown as Picture 5-44.
Now you can perform alarm set based on dierent status. Details please refer to List 5-1
Picture 5-44
¾ No: allow you select one desired channel
¾ I/O Status: allows you select the three options
– NO (Normal Open), NC (Normal Close) and
OFF. Set to “Normal Open”, I/O status Alarm will
be activated while sensor is ON; set to “Normal
Close”, I/O status alarm will be activated while
sensor is OFF; set to “OFF”, I/O status alarm will
not be triggered.
¾ Alarm out: allow you connect external alarm
sensor.
¾ Latch time: you can set how long the buzzer will sound when external sensor alarm is
detected (10s, 20s, 40s, 60s).
¾ Show Message: You can set show message on the screen when sensor alarm is detected.
¾ Buzzer time: you can set how long the buzzer will sound when sensor alarm is detected
(O, 10s, 20s, 40s, 60s).
¾ Send Email: Allows you set the alarm images is issued to a specied email.
¾ Full screen Alarm: The function is defaulted to “On”. When the motion detection or
external alarm is triggered, the corresponding channel will be switched to the full screen
mode.
… 29 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Konig Electronic SAS-SET DVR35 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Konig Electronic SAS-SET DVR35 in the language / languages: English as an attachment in your email.

The manual is 11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Konig Electronic SAS-SET DVR35

Konig Electronic SAS-SET DVR35 User Manual - All languages - 351 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info