626884
31
Zoom out
Zoom in
Previous page
1/58
Next page
ENGLISH
31
¾ Auto-overwrite: When set to ENABLE the DVR will record over the oldest les on the
hard drive. The DVR will always be able to record events as they happen, however, it does
means that you’ll need to get important events o the HDD before they’re overwritten;
and if overwrite is set to DISABLE the DVR will stop record once the DVR is full. Whilst you
won’t lose old footage, you run the risk of missing new events as they happen. Be sure you
want to do this before selecting it.
¾ HDD Format: Formatting the HDD will erase all data (i.e. footage) which is stored on it, and
re-create the FAT (le allocation table).
¾ USB Format: If you have a USB ash drive connected to the DVR, you can format that, too.
To do this, click the [USB Format] button and click [OK].
Note: It is an important rst step when conguring your DVR to make sure that the hard drive
(HDD) options are correctly set. So, strongly suggest that you do format the HDD before start
the rst record.
5.2.6.2 PTZ Set
Click [Main MenuDevicePTZ] to enter into the below window shown as Picture 5-47.
Picture 5-47
You could select the channel you desire to control
and set PTZ protocol (Pelco-D or Pelco-P), Baud Rate
(1200, 2400, 4800, 9600), Data bit (8, 7, 6, 5), Stop bit
(1, 2), Parity Check (None, Odd, Even, Mark, Space),
Address Code and Cruise status respectively. Please
note the PTZ device can be activated only when
a channel in connection with the PTZ camera is
selected.
5.2.6.3 Serial Set
Enter into the [Main menuDeviceSerial Set] interface shown as Picture 5-48.
Picture 5-48
When operate DVR via keyboard, it is required to set
communication protocol.
¾ Baud rate: set baud rate of serial communication.
¾ Data bit: set data bit of serial communication.
¾ Stop bit: set stop bit.
¾ Parity Check: set parity check to <None> or other.
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Konig Electronic SAS-CAM1200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Konig Electronic SAS-CAM1200 in the language / languages: English as an attachment in your email.

The manual is 11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Konig Electronic SAS-CAM1200

Konig Electronic SAS-CAM1200 User Manual - All languages - 351 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info