Manual Konig Electronic KN-MICW621 (page 3 of 96) (All languages)

570438

Zoom out

Zoom in

1/96

ENGLISH

Description LCD display receiver

• RF: Shows the strength of the received microphone signal

• AF: Shows the microphone’s audio signal level

• CH01: Selected pre-programmed channel

• A ANT: The antenna which receives the signal of the microphone (A for receiver A and B

for receiver B)

• 864.40: Frequency of the selected pre-programmed channel

• OPEN: Shows which receiver (display) is selected for the use of function buttons 2–5

• AUTO: Shows that the microphone is powered o. Appears also when there is no

connection with the microphone on the showed frequency in the display

• MUTE: There is no audio output from the receiver to mixer or amplier because the

microphone is powered o or there is no reception

• TUNE: Push the SELECT button (2) to switch between manual tuning or pre-programmed

channels. With manual tuning it’s possible to select the frequency by steps of

0.05MHz. The range is 840.00MHz till 868.00MHz. This feature oers the use of

other wireless microphones operating in the frequency band from 840.00MHz

till 868.00MHz. Note: the supplied microphones are pre-programmed from

863.00MHz till 865.00MHz

IMPORTANT NOTICE: It’s the responsibility of the user to ensure that the use of frequencies

comply with the local regulations and does not cause interference with other users.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Konig Electronic KN-MICW621 in the language / languages: All languages as an attachment in your email.

The manual is 7,4 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Konig Electronic KN-MICW621 Manual

Product: