570543
2
Zoom out
Zoom in
Previous page
1/24
Next page
2
ENGLISH
Wall Clock
First insert 2 “AA” batteries into the battery compartment after opening the battery door of the wall clock
and insert 1 “AA” battery into the compartment, then insert 2 “AAA” batteries into the sensor (transmitter)
after opening the battery door with a screw driver.
Functions and features:
- Indoor temperature display
- RF outdoor temperature display
- Weather forecast display
- RF receiving channels: CH1, CH2, CH3
- Temperature format: (°C/°F)
- Outdoor temperature range: - 20°C~50°C, Accuracy: +/-1°C
Time setting
- After putting 1 AA battery into the compartment, adjust the back wheel to set the time.
RF outdoor temperature instruction
Normal mode keys functions:
- Press the “°C/°F/DOWN” key to switch between °C/°F. The default temperature format is: °C.
- Press the “C/H/UP” key to switch between CH1, CH2 and CH3.
RF receiving
- After inserting the batteries in the clock and outdoor sensor, it will automatically enter RF mode
receiving for 3 minutes. The icon of the antenna will start to flash with 1 Hz frequency.
- In normal mode, hold the “UP” key for 2 seconds to clear the display data of the current RF channels
and renew the data again.
- If no signals are received within 60 minutes, the CH temperature will show “--.-”, and it will enter an
RF long receiving mode for 3 minutes.
- If it receives effective signals within 3 minutes, it will exit the RF long receiving mode and enter the
normal mode.
- If a signal is still not received within 3 minutes, it will exit RF receiving mode and enter the RF long
receiving mode within an hour. This will repeat every hour till it receives a signal.
- During RF receiving, the antenna icon starts to flash with 2 Hz frequency, and it will keep the icon on
screen if it receives the temperature signal. If no temperature is received, the icon will disappear.
Weather forecast functions:
- Weather forecast functions can forecast the weather conditions of the next 24 hours.
- Weather grade: Sunny/Slightly Cloudy/Cloudy/Rainy.
- Time of sensing: 30 minutes.
Wireless remote sensor (transmitter) instruction
- Transmitter frequency: 433.92 MHz.
- Batteries: 2x 1.5 V AAA.
- Use a screwdriver to remove the back of the battery compartment cover, insert the batteries into the
transmitter according to the correct polarity.
- Press the “°C/°F” button to select the temperature, either in °C or °F.
- You can put the transmitter in a garage, on an outdoor wall or window, indoor living room or garden.
- The maximum distance for the transmitter and receiver is up to 30 m (100 feet) in an open area.
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Konig Electronic KN-CL30 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Konig Electronic KN-CL30 in the language / languages: English, German, Dutch, French, Italian, Swedish, Spanish, Finnish as an attachment in your email.

The manual is 0,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info