508683
4
Zoom out
Zoom in
Previous page
1/112
Next page
4
Caution:
1. Please remove batteries if the product is not in use for a long time.
2. Never apply the electrode pads to your skin with the power supply on. Doing so may result in
sudden shock.
3. There are some areas of the body to which the pads cannot be easily affi xed. For this case, use
surgical tape from your local pharmacy to secure the pads.
Treatments:
1. Turn the power on by pressing the power switch. The TAP symbol will appear on the LCD
screen.
2. Select the desired treatment mode by pressing the MODE button.
3. Raise the intensity gradually by twisting the intensity control for both channels A and B. Both
channels can be set separately according to your needs.
4. When you change the treatment mode, the stimulation of the current treatment will stop. Set the
intensity for the new mode by twisting the intensity control again. After treatment, turn off the
power button.
Examples of treatment modes:
1. Tap - It promotes blood circulation by several kinds of stimulation such as high speed, low speed
etc.
2. Modulation - It releases fatigue by several kinds of stimulation such as low speed, high speed and
alternation of these speeds.
3. Kneading - It gradually releases neuralgia or muscular pain by stimulation such as strong and soft
pressures.
In the above 3 modes, the stimulation in A and B channels are constant and it is possible to treat
2 part of the body at the same time.
Standard intensity, time, numbers of uses:
Intensity: The intensity of the stimulation is felt differently by each individual and also will vary with
physical conditions. The strength of the batteries and the conditions of the electrodes also play a
role. Therefore adjust the intensity control button to a position you feel most comfortable.
Caution:
Do not assume that by increasing the intensity of the stimulation that there will be a stronger effect.
This may very well not be the case. However it is possible that excessive stimulation to the skin will
result in irritation or red eruptions.
Time: A standard amount of use per area is 10-15 minutes. A single treatment should not exceed
30 minutes.
Number: A standard number of use per day is 1-2.
There may be some people who feel fatigue. In this case lower the intensity, shorten the time, and
limit the number of uses to once a day.
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Konig Electronic HC-SM10 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Konig Electronic HC-SM10 in the language / languages: English, German, Dutch, French, Italian, Swedish, Spanish, Finnish as an attachment in your email.

The manual is 5,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info