508659

Konig Electronic HC-BM11 Manual

5
Zoom out
Zoom in
Previous page
1/86
Next page
5
BABY UNIT OPERATION
Power ON/OFF
Use the Power ON/OFF switch at the top of Baby unit to turn the unit ON/OFF. The power ON/OFF indicator
(LED) will be turned ON/OFF accordingly.
High-Low Transmission
Select High or Low power transmission by using the HI / LO switch at the side of the Baby unit.
High power transmission provides the maximum communication range with the Parent unit.
Low power transmission provides an approximately 100 meters communication range with the Parent unit.
Volume Control
Press the (+) and (-) button located on the top of the Baby unit to increase and decrease the volume of the
Baby unit.
Voice Activated (VOX) Function
When the sound level of the unit’s surrounding area reaches the preset level, the Baby unit will transmit the
captured sound to the Parent unit.
When the surrounding sound level is below the preset level, transmission will be automatically switched off and
the speaker on the Parent unit will also be switched off.
Night Light
Switch to ON or OFF by sliding the OFF/AUTO/ON switch at the side of the Baby unit. The night light will be
illuminated continuously at the base of the Baby unit.
Use Voice Activated Night Light (AUTO) by sliding the OFF/AUTO/ON switch to AUTO.
When the sound level of the unit’s surrounding area reaches the preset level, the night light will be turned on.
When the surrounding sound level is below the preset level, the night light will be turned off.
PARENT UNIT OPERATION
Power ON/OFF
Use the Power ON/OFF switch at the top of Parent unit to turn the unit ON/OFF. The power ON/OFF indicator
(LED) and LCD will be turned ON/OFF accordingly.
Volume Control
Press the (+) and (-) button located on top of the Parent unit to increase and decrease the volume of the
Parent unit. The corresponding volume level will be shown on the LCD volume level display. The 4 x LEDs
sound bar above the LCD display will also light up to indicate the strength of the sound level.
Melodies (Lullabies) Selection and Transmission
Press the Melody Selection Button at the top of the Parent unit to select the melody to be sent to the Baby unit.
The LCD will display L1 to L3 to indicate your selection.
The melody you selected will be transmitted to the Baby unit.
PTT (Push-to-Talk)
To talk to the Baby unit, press and hold the PTT button located on the side of the Parent unit and talk closely
to the microphone of the Parent unit.
Out of Range Alarm
When the Parent unit cannot receive a transmission signal from the Baby unit, the audio Out of Range Alarm
(continuous beep sound) will be set off, and ‘NO SIGNAL’ will also appear on the LCD display.
Baby’s Room Temperature Indicated on Parent Unit
The Baby unit can detect the baby’s room temperature and transmit the signal to the Parent unit. The
temperature reading is indicated on the LCD of the Parent unit. Choose °C or °F on the selection switch
located under the rechargeable battery pack on the Parent unit.
… 5 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Konig Electronic HC-BM11 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Konig Electronic HC-BM11 in the language / languages: English, German, Dutch, French, Italian, Swedish, Spanish, Finnish as an attachment in your email.

The manual is 2,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info