508665
3
Zoom out
Zoom in
Previous page
1/64
Next page
3
SETUP AND OPERATING PROCEDURES
1. BATTERY LOADING
a. Open battery cover at the back of the monitor.
b. Load four “AA size batteries. Please pay attention to polarity.
c. Close the battery cover.
When LCD shows battery symbol , replace all batteries with new
ones.
Rechargeable batteries with a voltage of 1.2V are not suitable for this
monitor.
Remove the batteries if the monitor will not be used for a month or more
to avoid damage or battery leakage
2. ON/OFF SWITCH
Your device has a touch button as equipment. Be careful not to touch the
button by mistake. Keep the ON/OFF switch in “OFF” position when the
device is not in use to avoid unintentional adjustments.
3. CLOCK AND DATE ADJUSTMENT
a. Once you install the battery or turn off the monitor, it will enter Clock Mode, and LCD will display time and date
b. While the monitor is in Clock Mode, press the “START” and “MEM” button simultaneously for two seconds (ON/OFF
switch in ON position), the month flashes at first. Press the button “START” repeatedly, day, hour and minute will flash
in turn. While the number is flashing, press the button “MEM” to increase the number. Keep on pressing the button
“MEM”, the number will increase fast.
c. You can turn off the monitor by pressing “START” button when the minute is flashing, then time and date are
confirmed.
d. The monitor will turn off automatically after 1 minute if no operation with the time and date unchanged.
e. Once you change the batteries, you should readjust the time and date.
4. CONNECTING THE CUFF TO THE MONITOR
Insert the cuff tubing connector into the socket in the left side of the monitor. Make sure that the connector is completely
inserted to avoid air leakage during blood pressure measurements.
External power supply socket
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Konig Electronic HC-BLDPRESS21 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Konig Electronic HC-BLDPRESS21 in the language / languages: English, German, Dutch, French, Italian, Swedish, Spanish, Finnish as an attachment in your email.

The manual is 11,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info