Manual Konig Electronic HC-BLDPRESS10 (page 3 of 68) (English, German, Dutch, French, Italian, Swedish, Spanish, Finnish)

508662

Zoom out

Zoom in

1/68

2. CUFF CONNECTION TO THE MONITOR

The cuff is attached to the monitor when it is packaged. Should the cuff become unattached,

align the two plugs and four brackets of the cuff with the plug sockets and bracket sockets of the

monitor and press the cuff to the monitor until the plugs and brackets are securely attached.

3. CUFF WRAPPING ON YOUR WRIST

a. Place the cuff around a bare wrist 1/2 to 3/4 of an inch above the

wrist joint on the open-hand side of the wrist.

b. While seated, place the arm with the cuffed wrist in front of your

body on a desk or table with the palm up. If the cuff is correctly

placed, you can read the LCD display when your arm is held

open-hand side-up in front of your body.

c. The cuff must be neither too tight nor too loose. You should be

able to place one ﬁ nger between the cuff and your wrist.

d. Measure using the same arm each time.

e. Do not move your arms, body, or the monitor during blood

pressure measurements.

f. Stay quiet, calm and rest for 5 minutes before and during blood

pressure measurement.

g. If the cuff becomes dirty, remove it from the monitor and wash

it by hand in a mild detergent, then rinse it thoroughly in cold

water. Allow the cuff to dry before using it for a blood pressure

measurement. Never dry the cuff in a clothes dryer and never

iron the cuff.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Konig Electronic HC-BLDPRESS10 in the language / languages: English, German, Dutch, French, Italian, Swedish, Spanish, Finnish as an attachment in your email.

The manual is 2,11 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Konig Electronic HC-BLDPRESS10 Manual

Product: