DELETE ONE: Press the
’
or
”
button to select a track, or press the
’
or
”
button until the
desired folder is reached. Then press the DELETE button once, “DEL ONE” will appear on the display,
press this button again to start deleting the current track.
DELETE DIR: If you wish to delete a certain folder in your device, press the
’
or
”
button until your
desired folder has been reached. Then hold the DELETE button and press the
’
or
”
button to select
DEL DIR. Press the DELETE button again to delete the current folder.
DELETE ALL: Hold the DELETE button and press the
’
or
”
button to select DEL ALL. Press the
DELETE button again to delete all files in your USB device.
NOTE: All delete features are PERMANENT and CANNOT BE UNDONE. Before you press the DELETE
button again to start the deleting process, press the STOP button to quit the delete function.
RECORD TO USB
1. Insert an external audio source (i.e. MP3 Player) into the USB slot.
2. Press the FUNCTION button repeatedly to select your desired recording source (PHONO or FM).
3. Set your recording bit rate.
Hold the BIT/REC button for more than 2 seconds and wait until ‘128KBPS’ appears on the display.
Press the
”
or
’
button to select 64KB, 128KB or 192KB. Then press the BIT/REC button to confirm
the setting. Then press the BIT/REC button again to start recording.
Or, you can just press the REC button briefly to record tracks at 128 KB (default bit rate) into the USB
device.
NOTE:
• WhenboththeUSBflashdeviceandCARDareconnectedtotheappliance,presstheBIT/REC
button and then press the
”
or
’
button to switch to USB. Press the BIT/REC button again to
confirm and start recording.
• Ittakessometimefortheappliancetoreadthemediadevices(cardandtheUSBdevice)in
accordance with their capability.
• Duringtheentirerecording,theRECORDINDICATORwilllightupinred.Recordingwillnotbegin
until ‘REC’ appears on the display.
4. Press the STOP button again to complete the recording and the RECORD INDICATOR will fade out.
NOTE:
1. The bit rate must be set if you do not use the default bit rate for recording.
2. When “REC ERR” appears, check if your media device is loosened.
3. No song title will be recorded during encoding mode.
4. Some USB drives may not be supported for recording if they are not formatted in a supported
parameter.
5. The unit cannot play music files directly from your PC. MP3’s must be stored on a portable memory
device, such as a SD/MMC CARD, and inserted into the unit’s USB or SD/MMC SLOT.
PLAY THE MMC/SD CARD
1. Press the FUNCTION button repeatedly until the CARD function is selected.
2. Insert a SD/MMC card into the SD/MMC slot and the display will show ‘USB’, and soon after will show
‘READING’.
Note: If the card is not detected, ‘NO CARD’ will appear on the display.