731341

Konig Electronic HA-INDUC-11N Manual

3
Zoom out
Zoom in
Previous page
1/126
Next page
3
ENGLISH
Enamelled
iron pot
Iron or
enamelled
iron pot
Cast-iron
pan
Iron pot Deep-fry pan Stainless
steel pot
Iron plate
Unsuitable pans
Heat-resistant glass, ceramic containers, copper, aluminium pans/pots. Round-bottom pans/
pots measuring less than 12cm.
Rounded base
Pot
Aluminium/
Copper pot
Base measuring
less than 12cm
Pans with stand Ceramic pot Heat-resistant
glass pot
Operating Instructions
This cooker has 6 or 7buttons and a press control. See pictures below to determine which
diagram is suitable for your device. Operate as following:
1) Plug in the power cable and put a cooking utensil on the centre of the top plate.
All light indicators will be illuminated and you will hear a beep after 1second. After the
beep the device will be in the o mode.
2) ON/OFF: Press the “ON/OFF” (1) button, the induction cooker will go to standby mode
and the digital display will show “--------”. Touch the “ON/OFF” button again, and the
induction cooker will shut down.
3) Power: In standby mode, press the “Power” (2) button. The cooker will be ready for use.
The power indicator light will glow and the digital display will show 1600. You can press
the “+”, “-” button to adjust the working power from 300W to 2000W. There are 8 power
levels; 300W, 600W, 900W, 1200W, 1400W, 1600W, 1800W, and 2000W.
4) Temp: Press the “Temp” (3) button, the corresponding indicator light will glow and the
digital display will show “150”. By pressing the “+” “-” button, adjust the temperature
from 60°C to 240°C. The plate has 8 corresponding temperature levels; 60°C, 90°C,
120°C, 150°C, 180°C, 200°C, 220°C and 240°C.
5) Time: in working mode, press the “Timer” (4) button. The digital display will show “00:30”
and ash for 5seconds. During this period you can set the time. You can set the minutes
from 31-59minutes by pressing the “+/^” (5) button. The time set will ash for 5seconds
and then start working according to the time set. You can set the hours from 0 to 2hours
by pressing the button the time you set will ash 5seconds, then it will work according to
the time. The total time is “02:59”.
6) Turn o: Press “ON/OFF” in any mode and the cooker will stop heating.
7) Optional: Press the “Lock” (6) button to protect preinstalled settings from being changed.
3 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Konig Electronic HA-INDUC-11N at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Konig Electronic HA-INDUC-11N in the language / languages: All languages as an attachment in your email.

The manual is 7,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info